Liczymy pasujące modele…
One more Thing from the Addams family Designed for unsupported printing with high detail. Happy HALLOWEEN Print instructions No support needed
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
While playing with gear designs I came up with this idea, and I found it interesting enough to share. The gears can move side to side, but they don't fall out. After printing the 60mm version I also uploaded two longer ones (80mm and…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
A simple multi-purpose holder designed for everyday use in the kitchen, home, or office. It can be used as a knife rest while preparing food, a phone stand, a pen holder, or a support for utensils and small tools. The minimal and stable…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Stranger Things coaster - HellFire Club Diameter : 100 mm Three versions : normal, negative, keychain 5 layers / 4 colors : First color (up to 2.3 mm) : black Second color (up to 3 mm) : yellow Third color (up to 4 mm) : red Fourth color…
Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu
Nothing/CMF watch 2 Pro charging dock/stand
Wydruk około 3,75 €–4,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Caltrop (noun) - a ball with projecting spikes so disposed that when the ball is on the ground one of them always points upward: used to obstruct the passage of cavalry, armored vehicles, etc. Again, do not use these to cause harm.…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
I like to have everything at my fingertips (short range), so i have designed things holder for my DeWALT. There are mounting points for hexbits and also box for screw or any other things which you wish to put there. This is quite huge…
Wydruk około 6,24 €–7,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you find your self in a situation where you need to hide a memory card or small written message on your person, this button is for you. This button has two halves. The base is sewn onto your clothing, while the lid is attached after…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Clothing hook with different positions
Wydruk około 2,54 €–3,10 € nettoWstępna wycena jednego wariantu
If your children learn to dress themselves it helps them to see where what clothing item is. Especially if you are often reorganizing the cabinets. With the different shapes of clothing you can easily see, in what drawer what item is. The…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
Not too much to say, I've included a .3mf with all the slicer settings I used and the whole assembly on one build plate. You will need a nail or paper clip just to retain the gears on the shaft.
Wydruk około 7,35 €–8,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dare Mighty Things is a “motto” at NASA. While on a tour at the Jet Propulsion Laboratory, I saw “Dare Mighty Things” in simple raised metal letters on a gray wall. Since then, I have wanted a version for my house. I finally got a printer…
Wydruk około 12,23 €–14,95 € nettoWstępna wycena jednego wariantu
I purchased an inexpensive $25 clothing rack from Amazon . While it conveniently comes with wheels, any time I tried to roll it any where, it was very flexible. I created this design to slide on to the different sides during assembly…
Wydruk około 6,22 €–7,60 € nettoWstępna wycena jednego wariantu
Connector pipe diameter – 9.5mm Layer Height: 0.2mm Material: PETG Openscad model requires NopScadLib Assembly #1 Stick the two printer parts together with connecting rod, through the protruding side sections, the connecting rod must go…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lord of the Ring - The One Ring dice bowl by Skar84 - Thingiverse This is a reupload because of course thingiverse is so broken the page and file is gone AND you cant even log in anymore. All credit goes to Skar84
This is a the shadow monster (also known as the "Mind Flayer") from the Netflix series Stranger Things. He is challenging and will test the bed adhesion limits of your printer! No rafts or supports are needed but might be useful if you…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your FPV camera with TPU in front of the lens for maximum protection but still with…
Stranger Things Hellfire Club Pendant made for SLA print, maybe works on FDM too, didnt tried
This time with cutouts to see the Glyphs
My takes on the Characters, NPCs and Creatures of Storm Kings Thunder are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the…
Hope you like this model! If you want more models from the kinderjoy funko collection from stranger thigns, tell me!
ULTIMATE COUNTER SYSTEM (UCS) Hello! This version only comes with number tiles. If you’d like to support my work, you can purchase all of the symbol tiles here: Ultimate Counter System on Cults3D –…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
For those who suffer from anxiety or ADHD, a simple meditation aid could provide focus and calm. But, there are those selling $100 decorative straw, and that is just too much. Fortunately, Blender and 3D printing can come to the rescue!…
The narrow one is from a random Discord which i dont find anymore (thanks Discord Search) the wide one i made in tinkercad. Based on your printers accuracy you might want to print +/- 1 % (mine is spot on). Also take a knife around the…
Most "tube squeezer" designs are based on forcing the tube through a fixed slot. This is either achieved by manually cramming the tube through a slotted novelty-shaped plastic toy or by using a flimsy rotating key in a feeble attempt to…
I don't have much to say about this one. Introducing "The Unmissable Detail That Changes Everything" – a playful 3D printed model designed to challenge your perception and spark curiosity. Are you ready for a mind-bending experience that…
Print one, and use it for your keys or cables to make them handy. Print many, and use them as a cable path or garlands hook to make your eyes happy. PRINTING INSTRUCTION BASIC .3MF FILE The basic .3mf file will fit on an IKEA linnmon…
Thing Pointer is a versatile 3D model featuring a hand with a pointing finger on a stick. For all your indicating needs! Versions Depending on whether you want to print the stick or use wood/pastic/metal rods, you can choose from:…
A highly detailed 3D statue inspired by Eleven (Jane Hopper) from the TV series Stranger Things . The scene captures her iconic moment of intense concentration, channeling her telekinetic powers as energy rises around her. The pose,…
These are Cursive letters for anything you want Name plate? sure ! Printer: any Filament:any supports no
I created this model to mount my cam pan v3 to watch over my backyard from the corner post of my deck. You can use this model anywhere you have an outside corner that is 90 or print with TPU or PETG and bend it, if its an abnormal corner.…
A keychain featuring the iconic Hellfire Club logo from Stranger Things. Size of 45x45mm. Feel free to resize. I have included two files to suit your printing setup: Hellfire Club KeyChain.stl: A standard, single-mesh STL file for regular…
its a very simple pokemon card divider ive made for my collection, very simple and require not a lot of materials.
I recommend gluing a smaller rod. The larger one simply snaps into place. No supports print in this orientation.
Side bracket for 40x40mm aluminum profiles for Fanatec Clubsport DD Pro / CLS DD / DD or DD+ Wheel Base's. The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time or…
Nothing Phone (2a) 3D Model created with Fusion 360 from dimensions, images and GSMArena's 3D Phone viewer Category: Models
This display stand is designed specifically for Stranger Things minifigures found in Kinder Joy eggs. It features individual compartments, giving each figure its own dedicated place. The front panels are foldable, allowing the stand to be…
Some handy boxes, update 2 - 2 boxes 20 and 30 mm high “15 compartments” version For other heights , have a look at : 10mm - https://www.printables.com/model/202486 20mm - https://www.printables.com/model/202483 30mm -…
Hey! This is a clothing hanger for a Disney Nuimos outfits. I fit the sizing of it to fit the clothes nicely, with the hook hanging over a ¼'' bar (This was made to hang over a ClosetMaid wire shelving unit I already had). I'm hoping to…
I saw something similar on the internet so i made one. First versions did not interlock segments, this looks good. If you come up with a nice name for this, please let me know. What it does? It is a structure made of interlocking segments…
The design is not perfect but I have shared the STEP file for modification, enjoy !
TL:DR: A simplification of the stage/platform thingy as seen in UK Monster Jam arena appearances. Designed for 1:64 toy trucks, and may be suitable for similar-sized alternatives from other brands. First of all, this isn't a true scale…
A rugged box for betafpv air65. Main box fits: drone spare frame 17 batteries original charger usb cable for the charger usb data cable (in a small compartment) bottom lid fits: props screwdriver spare canopy whatever you can fit inside…
This is a compact insert I made for Nidavellir and Thingvellir. There are several really cool inserts out there, but they require a lot of filament. I designed this insert to have a small footprint, yet allow me to move away from storing…
I made this to transfer the last bit of soap from a bottle into another one without spilling any. It has a funnel that makes sure none will leak out and holds the bottle tight enough to make sure it doesn't fall out. It also turns out it…
A stand designed for the Alexa Echo Dot (4th and 5th generation). This model is a remix based on a hand sculpture originally published on Thingiverse. Printed with PLA 5% Infill No Support
Llavero con el logo de Stranger Things. Keychan with the logo of Straanger Things.
Added a bit of space to avoid removing the battery connector from the ESP32
Sometimes, you just want to be left alone. Let everyone know that you are not in a social mood with this sign for your desk! I have made three versions; a simple embossed sign, a two-part embossed sign, and a two-part flat sign. I have…
Just a few designs for a full-clour MMU implementation of the Stranger Things / Hellfire Club coasters. Others out there have the cut-outs which I'm not a fan of, I just want a nice flat plate without crannies to wash out. These need a…
I must have printed the original case 10 times but I could never get the clips to engage without snapping, I also had a small bulge in the centre of the remote but that could be due to my printer tolerances as the original doesn't give…
I have noticed a trend of “Remixes” where the only change is to lower the face count of another designer's model. Well here is the ultimate expression of this thought. you want a Lowest Poly Christmas Tree….. Print it in Green a Lowest…
Some handy boxes, update 3 - 2 boxes 10 and 20 mm high “5 compartments” version For other heights , have a look at : 10mm - https://www.printables.com/model/202486 20mm - https://www.printables.com/model/202483 30mm -…
Needful Things - 1993 3D printable model. Prints in two parts. The big scene, and the two small men fighting. Size everything to your needs and print!
Modified the original design to sacrifice one button for IR functionality. from the original BOM, add a: 2N2222 Transistor IR LED (Adafruit 388) 120 ohm resistor 10 ohm resistor Test pad added for B+ straight from battery, the internal…
Plain and simple clothing hanger in three separate parts joining together with dovetail joints. Printing with 2 walls and 10% infill gives me more than enough strength (PETG) Hidden feature in the hook automatically creates extra walls…
Ilumina tu setup al estilo Hawkins con esta caja de luz inspirada en el logo de Stranger Things. 💡🧲 El diseño está pensado para imprimir en dos colores y añadirle tiras LED en el interior, creando un brillo rojo intenso perfecto para tu…
got into the ranger reject manga and decided to model up the transforming pistol sword thingy they use. Category: Props
A quick trace of an image I found online, with some added 3D aspects of my own.
A simple passthrough fidget toy/thing that should be relatively easy to print, with pretty wide tolerances. I print mine at a layer height of 0.2mm with a 0.4mm nozzle (on a modded Ender 3 S1 Pro). The one in the picture is an amalgam…
A remix of the SmartThings Hub (Gen2) Wall Mount - Ports on Bottom by neonpolaris. When I sliced the model in S3D it was two objects and the print would have been very weak structurally. I repaired the model so it is only one piece now.…
A great Wall Art of the Evolution of Demogorgon from Stranger Things. Do not forget to upload your makes, thanks ! Inspired by a sticker “Evolution” Wall Art Collection : Lego Minions Darwin Alien Rabbids (Les Lapins Crétins)
Wednesday thing Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I love my smart home setup, but having to tell my Google assistant to turn on or off the lights at 3 am is a little annoying. So I got some of the Samsung SmartThings buttons. They are exactly that, smart buttons to control your smart…
This is an organizer for Sub Terra (first game) and all the expansions. Everything fits in one box with no box lift Features: Fits sleeved cards Tile holder to store tiles during gameplay All special tiles are stored separate Card slots,…
1U 10'' Rack Mount Hue Hub & Smartthings Hub
SARCASM, I SPRINKLE THAT SH!T ON EVERYTHING, SIGN Category: Signs & Logos
The sensor only comes in off-white and is really ugly on dark colored doors. This cover can be used to match the color of the frame without having to paint it. Print in TPU (95) and it will fit snuggly. The model is not precise enough to…
This is a spacer for the SmartThings/Aeotec Multipurpose Sensor magnet. I made it for the model that I own which is: IM6001-MPP01 Printed in PLA at 10% infill.
YOU PEOPLE MUST BE EXHAUSTED FROM WATCHING ME DO EVERYTHING, sign Category: Signs & Logos
ReUpload from Thingiverse, great to print and to use Simple design filament/spool holder/roller. Screw-down and glue-down versions. For assembly you need 4 bearings 22×8×7 mm. For the version with screws, 4 M3×8 mm screws.
A monstrous flying monstrosity from the far reaches of the Lovecraftian mythos. This abomination can find a place in your games of Call of Cthulhu, Dungeons & Dragons (and other fantasy RPGs), and even modern, sci-fi, or horror tabletop…
If you are like me, you base your table top models after you paint them. I find this helps get underneath and around the model, the brush does not interfere with your base or basing materials, and or want to create more eccentric bases…
“Meshtastic” Heltec Lite - Weather resistant with Mounthing Brackets - Tactical Repeater/Node - Recon and Deploy I made the model a bit larger, thus also a "Barometer/Thermometer fits inside the housing, together with the 2x 18650…
A wall mountable plate designed to hold a SmartThings button. Remixed from: https://www.thingiverse.com/thing:3827965 and https://www.thingiverse.com/thing:5128845 Print with the show face on the bed, supports are not required if you have…
Why Build This? I use Raycast almost every day and wanted a dedicated one-key keyboard for it. With various micro controllers, key switches, and a 3D printer in hand, creating one seemed straightforward. My goal was to design a keyboard…
I installed Nocturne on the Spotify CarThing, since Spotify is bricking the CarThing in December. This currently requires a Raspberry Pi (Zero W or Zero 2 W) for use in the car so I needed to be able to mount the Pi. I am using the magnet…
This is a downspout thingy whatchamacallit
An organizer made for IKEA spice containers, but can also be used for anything else. Dimensions: 206mm X 90mm X 133mm , This model can fit anything thats 89mm X 84mm X 199 mm (1mm tolerance fit). The model also includes a slight tilt on…
Answer to question on reddit: https://www.reddit.com/r/Fusion360/comments/1gwgrig/newbie_help_please_how_would_you_do_this/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button
Fusion360 files for generating sorting boxes for rectangular items from small to large. The examples in the photos are a sorting box for my creditcard sized filament samples and one for SD cards. Configuration There are two files: one for…
Second version of a Nothing Ear A holder, this time lying flat, made a tunnel at the back for a USB c cable to charge in place. The case will also snap into place when open (may be a little tight at first) Created using Torchy's Nothing…
YOU PEOPLE MUST BE EXHAUSTED FROM WATCHING ME DO EVERYTHING, sign Category: Signs & Logos
you need to print: 1 spring 4 pins 2 connectors 2 switch pieces and 2 box's Everything is press fit together so no need for glue, but this was made to work on my prusa mk4s, so your printer might need some modifications of the model to…
SARCASM, I SPRINKLE THAT SH!T ON EVERYTHING, SIGN Category: Signs & Logos
Massager with smoothing effect. For connection you can use 6 bolts M4 20 mm. The dimensions of the massager are 110x110x63 mm. A massager for the back, legs and abdomen. Массажер с эффектом разглаживания. Для соединения можно…
I've been frustrated several times mounting a Samsung SmartThings Multipurpose Sensor as a door open/close indicator because some doors have a large offset between the door and the door frame. You can mount your Multipurpose Sensor…
Easily printable logo for Thingiverse. can be printed in individual parts or multicolor
This is a fully 3d printed mechanical lens swapper for the CMF phone 2 pro. Quickly swap between your normal camera and your lens with the spin of a gear! As a bonus, it only adds 1mm of extra thickness vs the normal backplate.…
A simple stand for flashything's “Mini Supercomputer” random flashing LEDs circuit boards, available from Etsy: Green Red Blue Yellow/Amber RGB Fast Flash RGB Slow Fade (No affilliation with flashything, just a satisfied customer.) Print…
42 is known by everyone who red the hitchhiker… Print it with no MMS in black, change to yellow in layer 6, change again to black in layer 11 and change again to yellow in layer 16.
I dont usually design things like this, but it turned out pretty good. Print with supports unless your printer is very good at overhangs
USE EYE PROTECTION! long thing is for holding bearing in vise round thing is for the air to grab the bearing have fun with this destructive sport and be safe.
I couldn't find a good position for included mounts, so I made one. I aimed for loose fit for accommodate printing difference but YMMV. Unscrew mount plate from included CD mount first with torx screwdriver then use it with this model.…
Both of my center brackets on 2 separate Mainstays brand clothing brackets failed and broke for a total of 4 brackets. so I created in Tinkercad a bracket and a sleeve for the part that broke to begin with the part fr the horizontal bar…
my third up and down, fractal star fidget
