Cupboard Hook for ELFA system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Having an ELFA storage system in the house is nice, but expensive to get new parts. Thought a simple hook would be…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Having an ELFA storage system in the house is nice, but expensive to get new parts. Thought a simple hook would be good, but paying $1 or whatever seems overkill. Designed this hook to carry my backpack (or whatever) and fitting in the slots. After the first prototype bend a little, I reinforced it and it can carry easily 5kg now. Made it printable without support, the 2 thin walls between the hooks have to be broken out though!
Uploaded 2 STLs with more or less the same hook, only difference is one is 16mm and the other 19mm spaced, in case someone wants different sizes (needed fine tuning for the backpack handle myself ;)
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
20%
Filament: Doesn't matter PLA/Doesn't matter Doesn't matter Post-Printing =============
No support required, integrated walls to remove though
The in-designed support walls between the hooks need to be removed, which is rather straight forward with a plier.
Category: Organization