CharZam Philips Spotlight glare shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glare shield for PHILIPS Pongee bar tube
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
For product: PHILIPS Pongee bar tube
URL: https://www.lighting.philips.se/consumer/search?query=Pongee
The spotlights have the GU10 lamp at the very edge. Then you get blinded even from the sides of the lamp. This shield prevents that.
Design
The spotlight diameter is 58 mm.
Created with AI
My idéa. My drawing. My instructions to the AI. My design choices in this iterative process. AI wrote the code used in OpenSCAD.
Printing
No supports needed during printing.
Use a knife to carefully cut away excess filament. Make sure no sharp edges remain to avoid scratching the lamp.
The big surface at the bottom is for friction to have the object stay in place during print. It was not enough with only the object.