Liczymy pasujące modele…
Parabolic reflector for studio lighting, it could be mounted on my other lamp designs for standard LED 20-100W modules with 34mm hole distance Focal height 3mm, overall height 200mm Focal height 5mm, overall height 200mm You can print the…
A 45-degree angled wall mount for Ring Spotlight cameras. I needed to mount mine on a wall that runs parallel to an alley — without the angle, the camera would just stare at the neighbor's fence. This tilts it 45° so it actually covers…
Tak till Ringkamera (Spotligtcambattery)
This is a cover/adapter for a LED spotlight ( if scaled at 25 cm the spotlight hole is 8 cm)
This is my remake of the STEDI Smiley spotlights, This prints in two parts, there's the spotlight with the print and then there's a cylinder, this cylinder goes into the first part to make the printed smile white. May have to file the…
I couldn't decide what size spotlights I wanted on my car, and couldn't find any models. quickly whipped up this based on the limited specs I found. 3mf is 10% lighting and a few other tweaks to get to 242 grams, potentially 4 per spool
Front spotlight arms for 3mm LEDs with holders. There is no need to reprint the front chassis, just pass the wires into the hole above the fender, line up the arm and drill a small 2mm hole, the bottom arm has an indentation that goes…
Mounting option for 902 120 degree LED spotlights. One side of the bracket allows for the use of M3 (4x5mm) heated inserts. The other side allows a 0.25x0.25x0.875in magnet to be glued into place.
Even with the updated Elegoo Centauri secondary LED or additional top-mounted LED strips, the area between the build plate and the nozzle often remains in shadow due to the bulk of the toolhead. To solve this, I designed a custom mount…
The diameter of the large pipe is 32.7mm. Diameter of small tubes 19.75mm. If you need a different diameter, adjust it in the slicer by compensating for the inner and outer dimensions
These files are intended for use with the TOMY TMP Refit Enterprise diecast collectible. They are non-permanent additions that can be removed or replaced as needed, at any time. As such these additions are non-invasive and do not…
Trim box for exterior installation of the wired version of the Ring Spotlight Cam. The box covers the mounting base and cord to cover and weather proof. Allows running the cord through the wall into the house without cutting the cord.…
I designed this model inspired by a vintage industrial spotlight adjustable spotlights Check the model here: https://a360.co/4jCvwAJ BOM: 3 x Hex Head Screw M8 x 1.25 mm Thread, 30 mm Long 3 x Hex Nut Medium-Strength, Class 8, M8 x 1.25…
This is a quick base mount for a whole slew of cheap spotlights. I only need to illuminate a disco ball a couple times per year, so there's no point in wall-mounting the spotlight. This base is solid and blends in easily in a dark room.…
This is a collection of brackets and cover panels for the Ikea Frekvens LED Spotlight cube light. (Ikea Frekvens LED Spotlight (Article Number 504.203.67)) The holes on the light use SIZE HERE screws.
add-on spotlights for the N&K loading vehicles you can find the main body at https://www.thingiverse.com/thing:2713498 i have update whit a add-on Dozer blade = https://www.thingiverse.com/thing:2782700 full arnour =…
I wanted some decent outdoor spotlights that could use any E27 light bulb had a nice cover that could be customized. It is in 3 parts: A bottom retention ring to hold it to the stake light, The main body (there are 2 options for that (I…
The transformer of the old halogen bulbs of the mirror burned out, and it was time to switch to the more energy-saving LED lamps. My choice is the spotlights with GU10 socket, but that the supports on the market are all too wide to fit my…
This is a cover/adapter for a LED spotlight ( if scaled at 25 cm the spotlight hole is 8 cm)
This is a usefull spotlight LED Holder, which can hold mini spotlight led Vertically/Horizontally.
This thing allows you to use inexpensive color gel filters on your LED accent PAR38 spotlights for the holidays. My home has a bank of accent spotlights. In past years, I've used expensive ($20) colored halogen bulbs. I've recently…
I recently purchased a DDR arcade cabinet that had two non-DDR spotlights that were missing bulbs of an unknown type. The manual calls for 12v 20-35w bulbs and I liked the feel of incandescent bulbs, hence designing these brackets that…
What you need Dummy 13 Version 1.0! printed at 250% KAPPLAKE LED spotlight Printed parts bed1 : spotlight bed2 : cover & button bed3 : cable_adapter
Meine Frau bastelt sehr gerne mit klassischen Papiertheatern und wünschte sich ein Spot für die Beleuchtung von einzelnen Figuren. Daraus entstand dieses Projekt. Der Scheinwerfer besteht aus einer Stützklammer (für die Befestigung an…
Glue onto the round part of the conduit, near the back.
These are designed to replaced the old bulb/leds used in the unity spotlights commonly found on police cars, these plates are a drop in to the factory housings and use the baja designs squadron. they can be wired into the normal wiring or…
BELL & HOWELL Bionic Spotlight Solar Powered BIONIC . this is a spacer to make more room for batteries or Lora devices. its 30 mm tall. ITS A TIGHT! fit so adjust as need be. Source your own screws. I haven't figure that part out yet. I…
Introduction & Overview This project is based around the 100 Watt LED modules that can be purchased online. I've played around with these over the years, and I finally decided to make a proper project based on this part. This was inspired…
larger than original, not circular to fit my mirror. Hard-press the top part. Maybe some adjustement needed for your printer. printed in white pla, 0.2 with supports
Motivation For the proper installation of the Paulmann LED Set 3x3W (Mirco Line) I needed a housing for the assembly into a hollow wall. I also wanted to place a Shelly switch into the housing, so some additional space was added for…
Minimalist housing for GU10 Philips Hue bulbs. Snap-fit design, perfect for costom LED lighting setups.
The spotlight was too wobbly in Dummy13's fist. I added a handle so it is more firmly held within Dummy13's hand. What you need Dummy 13 Version 1.0! printed at 250% Ikea KAPPLAKE LED spotlight Supports are required only for the handle. A…
Shelly GU 10 Spotlight Bulb RGBW 230V For use by trained professionals or electricians only!!! Required components: 1x GU 10 socket (Amazon) 1x Shelly Bulb GU 10 Spotlight RGBW 2x Wago terminals 1x cable with plug Shelly GU 10 Spot Lampe…
Printer : i3 MK3 Rafts : No Supports : Yes Resolution : 0.20 Infill : 20% Filament Material : PLA
Easy fix when you get slightly blinded by the bleeding light off the side of the Hue Lily. Built in drainage for rainwater. Clicks into the ridge near the top. It is similar to the shade of the XL version. The objects orientation might…
We got a set of the WILLED USB Rechargeable RGB LED Spotlights for our daughter, for decorating blanket forts and whatnot. But they're sometimes a bit too bright & directional, so made this simple diffuser for them. The one in the photos…
I started with a nice slide connector from OTandAT on Thingiverse. I built around it for the base. I made center section to house electrical and added a top cap to mount light. Parts: 16 LED spotlight or your choice. Amazon 4 for $13,…
The IKEA Nymane Ceiling Spotlight is a $25 ceiling or wall mountable fixture. It accommodates a recessed GU10 bulb and features a rotating base that also tilts at up to 90 degrees. This allows you to aim the light unhindered in any…
Add colour gels to miniature LED spotlights. The holder push-fits onto the barrel of a Hera LED-eye 25S luminaire or similar luminaire with a diameter of 14mm. I have added an additional STL file for luminaires which have a 15mm diameter…
So your spotlights have too short spikes… A common problem! I found some metal tube, and decided to use it. I also made some upgrade and repairs while I was at it. Spotlights are ~40mm wide. It contains: What is special with this modell…
Made some “alarm clock support” which shines my face early in the morning I used a LED GX 53. The lamp is installed in the front part, the wire connection is hidden in the back part. Inserts (on M3 screws) allow you to tilt and move the…
I've included a 2 and 3 color model. The 2 color is for printing in black and white. The 3 color is for black, white and glow in the dark. The glow in the dark filament I have is translucent, so it needs a white behind it, or the black…
I designed this 3D-printed LED spotlight mount to upgrade the old incandescent light on my lathe. I printed in Petg on my CoreOne to withstand the heat from the LED light with the following settings: -0.25mm (structural) -0.4 HF Nozzle…
Illuminate your space with this bold cyberpunk lamp, designed for ease and impact. This model prints as one piece — print-in-place and no supports required, with only one step of assembly: snapping on the cap after printing. It includes a…
Description A sleek, adjustable spotlight you can 3D print yourself. Designed around standard GU10 bulbs, it’s affordable, easy to assemble, and stylish enough for any modern interior — perfect for accent lighting in living rooms or as a…
I made a spotlight cover that glows in the dark. As soon as you go to sleep or turn off the light, the PLA Glow in the dark starts to glow. It is not very usefull, but maybe fun for kids to fall asleep or just like me for in my office…
Printed with PETG and TPU Try out the printed parts if they fit together before mounting Mount the Bracket first put the Buffer Ring onto the bulb corpus put the Bulb with the Buffer into the Spot-Corpus (It should be flush) Make sure it…
An insert to neatly store all the components of the board game spotlight
This is my remake of the STEDI Smiley spotlights, This prints in two parts, there's the spotlight with the print and then there's a cylinder, this cylinder goes into the first part to make the printed smile white. May have to file the…
I redesigned the head, to give the moving head a look like a spot light and designed it to look similar to the Eurolite tmh-s60. I think it fits almost any small moving head spot with manual focus. If you need a different design, let me…
I couldn't decide what size spotlights I wanted on my car, and couldn't find any models. quickly whipped up this based on the limited specs I found. 3mf is 10% lighting and a few other tweaks to get to 242 grams, potentially 4 per spool
Front spotlight arms for 3mm LEDs with holders. There is no need to reprint the front chassis, just pass the wires into the hole above the fender, line up the arm and drill a small 2mm hole, the bottom arm has an indentation that goes…
Mounting option for 902 120 degree LED spotlights. One side of the bracket allows for the use of M3 (4x5mm) heated inserts. The other side allows a 0.25x0.25x0.875in magnet to be glued into place.
Even with the updated Elegoo Centauri secondary LED or additional top-mounted LED strips, the area between the build plate and the nozzle often remains in shadow due to the bulk of the toolhead. To solve this, I designed a custom mount…
Elevate your home lighting with this minimalist, designer-inspired ceiling spotlight . Specifically engineered for GU10 LED bulbs , this model balances professional aesthetics with safety-conscious engineering. Verified Thermal…
If you are annoyed by the poor OEM design of the spotlight mount, just use this modification. Afterwards you will be rewarded with a light source capeable of providing luminosity in all directions. Additional parts needed: Screw ISO 4014…
The diameter of the large pipe is 32.7mm. Diameter of small tubes 19.75mm. If you need a different diameter, adjust it in the slicer by compensating for the inner and outer dimensions
These files are intended for use with the TOMY TMP Refit Enterprise diecast collectible. They are non-permanent additions that can be removed or replaced as needed, at any time. As such these additions are non-invasive and do not…
Bought these magnetic, rechargable spotlights from Amazon ( https://a.co/d/0b81ogiW ) and wanted them to be on the door, but did not want permanent marks. So, solution: door knob jigs that hang on the exterior knob and have a space for…
I needed a wall mount for the toothbrush base charger. Added counter sunk screw holes and a cable guide
The zip file contains the 123dx source file created with the Autodesk 123design program. If you need to modify the drawing and have difficulty finding the program, leave me a comment and I will provide you with a link to download it
remixed to include screw holes for permanent mounting Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Category: DIY
Spotlight Cover 4" LED. Modified from Quintin9801's NiLight Cover on Thingiverse. https://www.thingiverse.com/thing:4921726 The cover needed a cutout to allow for the mount bracket on my lights.
For diffusing and directing ceiling spotlight (68 mm spotlight). You can print in white PLA. WARNING: only use with LED lights, others will be too hot and will melt the PLA. Print Settings Printer Brand: Wanhao Printer: Duplicator9 Rafts:…
This decorative LED spotlight cover can be used to mount the light with custom holders. There is an M3 hole with a cutout for an M3 nut, providing secure mounting options. This print will require some support material for the mounting…
I've been setting up a macrophotography and video station for some time where I can take shots in a controlled way, but the biggest difficulty I always come across is lighting. Almost always, in this type of photography, global and…
I recently printer the Dremel Box Organizer (https://www.printables.com/en/model/217722-dremel-box-organiser-gridfinity-based ), but I have some additional accessories. Since the 8220 kit comes with an additional nut with a spot light,…
Did this as a remix of my ring stickup baseball cap cover, I've never made this, but... it should work? Category: Camera
Slip on sling style mount with Pic rail attachments
When I replaced the normal floodlights in my bedroom with smaller LED versions, I found that the original metal rings that came with the fittings were too large. As they are LED bulbs, the plastic won't melt (or hasn't melted yet) and so…
This is a simple holder for an IKEA “Lakene” spotlight. I haven't tried it with anything else, but reasonably, anything with the same size and general mechanical properties should work. Use supports. Screw the holder to whatever you want…
I used the wrong bulbs in my ceiling spotlights so the covers melted. I replaced the bulbs with LED ones and created these covers. There is an optional infill included as well. You can print this in any color to change the color of the…
This is a small spotlight with an adjustable mount which utilizes 12mm bullet node pixels and is intended for outdoor holiday accent lighting. The pixels themselves are waterproof so it is a rather open design with a large hole in the…
This is a simple, yet very useful design for a all-in-one spotlight. After scouring the internet for simple LED spotlight designs we could use to show off Lego models with simple and easy accessible materials, I came up with nothing. I…
Only for LEDlight. Makes a downlight for 72mm hole fit in a 140mm hole. Not for lightsources that becomes hot. Follow instructions for the lightsource, consult electritian before install. If not used properly it can cause fire, explotion,…
If you print this with a red filament, you have a dual color diffused light and a white spotlight.
Spotlight GU10 enclosure with interlocking bracket specifally designed for the Philips Donegal line, but might fit other brands Designed for when you want spotlights but do not have enough space between your ceiling and false ceiling.…
This bracket is useful to mount a little spotlight on the 4040 opening aluminium profile of the structure of the printer. You can print more than 2 joints to make the system longer. To join the part, you have to use M4x20 screws with M4…
This is a holder (printer mount + webcam adapter) for the Trust SpotLight Webcam for the German RepRap NEO 3D Printer. One M4x16 screw and a M4 nut are required to assemble the adapter to the mount The screw in the base of the webcam fits…
new diffusors for christmas https://www.printables.com/de/model/64058-spotlights-lampshade-v2-gu10-or-12-v-led-diffusor- You probably know all of these cheap lights that contain GU10 lamps. Most of these lights are kept very simple and…
Designed for 4" recessed lighting, this provides a cheap and convenient way to add yard lights.
This is a snap on shield for LED spotlights. I use these spots for my outdoor holiday decorations. But out of the box, they spray light all over which takes away from the nearby decorations. This shield helps concentrate the light into a…
Remix of the Y-axis link from: https://www.printables.com/model/310284-ender-3-s1-cable-chain Hardware needed: LED light strip (if using the LED light model) M3 x 6mm screw (optional, but strongly recommended) Designed to create…
I designed this barndoor system for my PAR16 Spotlights. They work great at controlling the light and can be rotated as needed due to the round fixture. Your lights might differ, so check the fixing mechanism and scaling to get a good…
I designed this for a friend. It fits a “Greenmigo 12W LED Scheinwerfer” (https://www.amazon.de/dp/B071PB63D4). But I think there might be other things that fit this kind of mount. I included the customizable openscad file. It is a hot…
just a small holder for your led spotlight. holes are for M5 Screws layerheight:0.2 infill:15-20% no supports
A mount point for attaching a spotlight, worklight, webcam etc. to the corner of a shelf or cabinet. Didn't have any LED strips to get better lighting for my Bambu Lab X1C, but I did have some LED spot/worklights and a shelf next to the…
Adapter for spotlight - measure 100x100mm, external diameter 96mm, internal diameter 67mm
This is an adapter to hold a color lighting filter gel on the Harbor Breeze Copper flood light 3.5-Watt Copper Low Voltage LED flood light. Simply cut out your own color gel and insert into adapter.
I've just added a set of four spotlights to the front of my Cooper S R53. This requires two relays, one for each pair and a fuse. This is designed to have two relay sockets push in from underneath and a fuse holder in the front slot. The…
This is a custom replacement mounting bracket for the Merkery Smart Solar Spotlight ( available from Walmart ). The original has a ground spike or screw mount fitting. I needed something to clip around a 22.5mm square cross beam of the…
