1 / 1
FNRSI LCR P1 Tester Caddy Base
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This caddy has been designed to protect the LCR P1 Tester on the workbench
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
FNRSI LCR P1 Tester Caddy Base
This caddy has been designed to protect the LCR P1 Tester on the workbench
Printed on 0.2mm PLA, no need for supports.
Small strips of double side tape secure the device.
I've included a Step file as well as the stl as this will make it easier to make any adaptions you may need.
Hope this helps someone.