Flat Oval Cable Hook for Flat Bundles and Power Bricks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flat oval cavity for flat bundles, flat cables and small power adapters.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Flat oval cavity for flat bundles, flat cables and small power adapters.
A wide, low cavity with a flat floor. Cables lie side by side in two rows instead of a round bundle.
Features
Flat floor, two rows of cables
One piece, no assembly
Open slot on the long side
Sizes
Three cavity sizes: 30 × 12, 40 × 16, 50 × 20 mm.
30 × 12 mm cavity: 16 × 40 × 21 mm, 20 min on Bambu P2S, 6.1 g PETG
40 × 16 mm cavity: 16 × 50 × 25 mm, 21 min on Bambu P2S, 7.7 g PETG
50 × 20 mm cavity: 16 × 60 × 29 mm, 21 min on Bambu P2S, 9.3 g PETG
Part dimensions, print time and PETG weight per size.
How it works
One piece with no moving parts. Lay the cables in through the rounded slot.
Fix with one countersunk wood screw Ø4 × 20 mm (two on long or multi-ring parts); the screw sits in the floor of the hook and you reach it through the slot or the access hole.
Print settings
PETG recommended (ASA/ABS also fine). PLA creeps under constant load.
0.20 mm layers, 4 walls, 5 top and bottom layers, 40% gyroid infill
On its side (the STL files are already rotated)
No supports needed.
Fasteners: countersunk wood screw Ø4 × 20 mm (not included)
Files
STL: print-ready files for every size
3MF: sliced Bambu Studio projects (PETG, 0.4 nozzle, 0.20 mm)
Print one size first and check the fit before printing a batch. Part of the KU cable holder series: under-desk cable holders in many sizes.