1 / 8
Crown Victoria Key Fob / Grand Marquis Key Fob / Marauder Key Fob / Ford Key Fob — zdjęcie 1
1 / 8

Crown Victoria Key Fob / Grand Marquis Key Fob / Marauder Key Fob / Ford Key Fob

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Key fob for Crown Victoria Key Fob / Grand Marquis Key Fob / Marauder Key Fob, should fit any ford key of that era

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Basic Info

  • ASA/ABS filament for vapor smoothening (can use any filament but asa or abs will be needed if you want it glossy smooth)

  • 3m heat inserts + 3m x6mm bolts (x2 of each)

  • 1 inch key ring (x1)

  • .15 mm layer hight

  • no supports for back, please modify supports so none generate inside the key ring

was made for my grand marquis but i could not get the grill to look right so i made the front end of a crown vic and added a marauder wing

heavily edited the following files and used them as a base to make this
Credits
model used for design (not 3d printable)
L95XP
https://sketchfab.com/3d-models/mercury-grand-marquis-free-0f9e6281fd6b4c7a8c5c9de957ccf5a5

For key fob
https://www.printables.com/model/748854-ford-key-fob-case-front

the sizes are 111.6 mm and 102.7 mm long, the bigger print was the first print but i felt as it was too big so i tried to make it as small as possible while still being proportionally a crown vic i cannot make it any smaller due to the internals of the key fob, this design should fit any ford with this key fob which i think nearly all of them had

Tagi