1 / 6
Ribbed Ring Cable Holder, Inner Ribs (Ø16–34 mm) — zdjęcie 1
1 / 6

Ribbed Ring Cable Holder, Inner Ribs (Ø16–34 mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Inner ribs in the ring grip the cables.

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

Inner ribs in the ring grip the cables.

Ribs inside the ring press lightly on the bundle so the cables do not slide through.

Features

  • Inner ribs hold the bundle

  • Prints without supports

  • Detents in both positions

Sizes

Five inner diameters: Ø16, 20, 24, 28, 34 mm.

  • Ø16: 16 × 32 × 28 mm, 30 min on Bambu P2S, 9.2 g PETG

  • Ø20: 16 × 36 × 33 mm, 31 min on Bambu P2S, 11.1 g PETG

  • Ø24: 16 × 40 × 36 mm, 33 min on Bambu P2S, 12.8 g PETG

  • Ø28: 16 × 44 × 41 mm, 38 min on Bambu P2S, 15.0 g PETG

  • Ø34: 16 × 50 × 47 mm, 43 min on Bambu P2S, 18.3 g PETG

Part dimensions, print time and PETG weight per size.

How it works

Hook and ring are printed separately. The slotted ring snaps into a groove inside the hook (no supports needed), turns 180° between OPEN and CLOSED, and two rows of detents click in both positions. The ring has fine knurling for grip.

Fix with one countersunk wood screw Ø4 × 20 mm (two on long or multi-ring parts); the screw sits in the floor of the hook and you reach it through the slot or the access hole.

Print settings

  • PETG recommended (ASA/ABS also fine). PLA creeps under constant load.

  • 0.20 mm layers, 4 walls, 5 top and bottom layers, 40% gyroid infill

  • On its side with the ring axis vertical (the STL files are already rotated); hook and ring are separate files

  • No supports needed.

  • Fasteners: countersunk wood screw Ø4 × 20 mm (not included)

Files

  • STL: print-ready files for every size

  • 3MF: sliced Bambu Studio projects (PETG, 0.4 nozzle, 0.20 mm)

Print one size first and check the fit before printing a batch. Part of the KU cable holder series: under-desk cable holders in many sizes.

Tagi