Triple Ring Cable Holder, Three Equal Rings (Ø18–30 mm)

Three equal snap-in rings in a row.

A tidy row of three identical rings, for example one for each monitor or one per cable run.

Features

• Three equal rings in one plate

• Screws under first and last ring

• Prints without supports

Sizes

Three sizes: three rings of Ø18, 24 or 30 mm.

• Ø18: 16 × 96 × 31 mm, 75 min on Bambu P2S, 29.7 g PETG

• Ø24: 16 × 114 × 36 mm, 84 min on Bambu P2S, 37.3 g PETG

• Ø30: 16 × 133 × 43 mm, 107 min on Bambu P2S, 47.1 g PETG

Part dimensions, print time and PETG weight per size.

How it works

Hook and ring are printed separately. The slotted ring snaps into a groove inside the hook (no supports needed), turns 180° between OPEN and CLOSED, and two rows of detents click in both positions. The ring has fine knurling for grip.

Fix with one countersunk wood screw Ø4 × 20 mm (two on long or multi-ring parts); the screw sits in the floor of the hook and you reach it through the slot or the access hole.

Print settings

• PETG recommended (ASA/ABS also fine). PLA creeps under constant load.

• 0.20 mm layers, 4 walls, 5 top and bottom layers, 40% gyroid infill

• On its side with the ring axis vertical (the STL files are already rotated); hook and ring are separate files

• No supports needed.

• Fasteners: countersunk wood screw Ø4 × 20 mm (not included)

Files

• STL: print-ready files for every size

• 3MF: sliced Bambu Studio projects (PETG, 0.4 nozzle, 0.20 mm)

Print one size first and check the fit before printing a batch. Part of the KU cable holder series: under-desk cable holders in many sizes.