1 / 2
Fan Bracket for LSI 9207-8i with Noctua 40x10mm Fan (NF-A4x10) — zdjęcie 1
1 / 2

Fan Bracket for LSI 9207-8i with Noctua 40x10mm Fan (NF-A4x10)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed model to better fit my LSI card and motherboard and to fit a Noctua 40x10mm fan.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

This simple little bracket dropped the temperatures of my LSI 9207-8i HBA card from almost 100C down to 39C (as measured by my temp guns).  This can only help extend the life of the card.

I remixed the original design to accomplish three things:

  1. Move one of the bracket clips away from the PCI slot as it kept my card from fully slotting into place.

  2. Better fit a 40x10mm Noctua fan (NF-A4x10), bringing it closer to the heatsink and enlarging the pins to better secure the fan.

  3. Reduce the clearance needed underneath the bracket.

Prints great upside down with slim tree supports.  Printed in PETG on my U1, the little slots in the brackets needed to be trimmed a bit in order to better slot onto the card.  I used a razor blade to trim the support leftovers.

Tagi