P
Printablesthall72
Lego Compatible (99207.dat) Bracket 1 x 2 - 2 x 2 Up
This model is compatible with the lego system.
- Pobrania
- 1005
- Polubienia
- 60
- Ocena
- 5
Wyniki wyszukiwania: 9207
22 modeli
P
PrintablesThimira
Fan Bracket for LSI 9207-8i with 40x20mm Fan (NF-A4x20)
This is a remix of https://www.thingiverse.com/thing:3646996 I have modified it to use a 40x20mm fan, instead of the 40x10 fan from the original. Tested with a Noctua NF-A4x20 FLX fan. For best results, print on it's side with…
- Pobrania
- 378
- Polubienia
- 36
- Ocena
- 5
P
PrintablesTannis Root
Fan bracket for LSI 9207-8i / 9217-8i (for cheap fans, fdm friendly)
4 new variants : #1 lsi-fan-bracket-v4-Finished Bracket No holes in the pillars v2.stl - Only holes in the pillars removed, for a Noctua fan #2 lsi-fan-bracket-v4-Finished Bracket Noctua Raised pillar v1.stl - For a Noctua fan, holes in…
- Pobrania
- 259
- Polubienia
- 30
- Ocena
- 5
P
Printablesdarken
Lenovo ThinkCentre M920q - Slot-cover/baffle for LSI SAS 9207-8e + 2.5GbE RJ45
It's a very tight fit, and the SAS card is slightly unaligned but it fits, and it works \_(ツ)_/
- Pobrania
- 96
- Polubienia
- 14
- Ocena
- 0
P
Printablesm3lv1lle
LSI 9207-8i single slot cooler
I designed this fan shroud because the card really needs some active cooling, but I didn’t want to use a bulky 40 mm axial fan. This model uses a 45 mm blower fan (mine came from an old Anycubic i3 Mega S) and only takes up a single PCIe…
- Pobrania
- 64
- Polubienia
- 10
- Ocena
- 0
P
PrintablesBenoit_LdL
HP LSI 9207-8e 4010 radial fan duct
I needed a low profile fan duct for my HBA card inside my space constraint hp EliteDesk 800 G4 SFF so I created this. It uses an 4010 radial fan (mostly found as part cooling fans for 3d printers). As I only had a 24V fan laying around, I…
- Pobrania
- 48
- Polubienia
- 6
- Ocena
- 5
P
Printablesolegenot
lsi sas9207-8i fan duct
Cooling shroud for hot HBA card with 4010 radial fan.
- Pobrania
- 47
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJurotom
7mm thin fan bracket for LSI 9207-8i
I like fan bracket by Tannis Root but it wouldn't fit inside my small case. This is a remix of his lsi-fan-bracket-v4-Finished_Bracket_For_Cheap_Fans_v1.stl Instead of 10mm thick fan it now fits 7mm thick fan (4007) from aliexpress. It's…
- Pobrania
- 42
- Polubienia
- 15
- Ocena
- 5
P
PrintablesFoShizzle
LSI 9207-8i SAS Controller HBA Model
LSI 9207-8i Model A simple model I used for mocking up when designing a new homelab.
- Pobrania
- 40
- Polubienia
- 3
- Ocena
- 5
P
PrintablesJan möller
Nozzle for Kaercher VP 145 Vario Power Jet 4039784920743
Replacement nozzle. Print upright with brim, 7 walls. The model has a hexagonal drill holder molded on. This allows you to shape the cone onto the cone in the lance at medium speed (gets warm). then the part is cut off and drilled through…
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 5
P
PrintablesMurdogk
lego 79389 73825 44728 99207 93274 3956 4598 14520 30166 41682 4585
lego 79389 73825 44728 99207 93274 3956 4598 14520 30166 41682 4585
- Pobrania
- 29
- Polubienia
- 7
- Ocena
- 0
P
PrintablesTannis Root
Frame fan bracket for LSI 9207-8i / 9217-8i
I needed to mount the card at the bottom PCIE slot on my motherboard but there was 0 free space between the holder and the PSU, which would prevent the Noctua fan from doing its job. I redesigned to hold the fan by the little indents in…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
Printablescrasbe
Volvo Cover Washer and Gasket (8250235, 30751307, 9207806)
When converting a vehicle from Manual to Automatic or to Electric, the clutch master cylinder is not used anymore, leaving a hole in the firewall. Automatic cars came with a cover washer in place of the master cylinder, but it appears to…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJeroen3
LSI 9207 fan clip 40mm
Print in PETG, 100% infill recommended to avoid drooping when hot. Mount the fan using two M3x12 hex socket or M3x15 countersunk > ⚠ WARNING: Careful with clipping on the PCB, there are small SMD parts on the bottom card edge. I modeled…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
Printablesrootbeer506
Dyson Vacuum Hose Replacement Part: 920765-04
This fixes the retaining mechanism in the Vacuum Hose Nozzle. Works for many different models, but mostly ‘Ball’ versions. Pull the hose and top assembly apart. Use a screwdriver to pry the white plastic part off the top. Remove the…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGoldenBoyGarage
92075-169 Damper Bushing S1 S2 S3 H1 H2 KH250 KH400
92075-169 A TPU printable version of the original rubber damper. Note that there is a recess in the bushing and it will turn out ugly without support. I am using them today on my bike, they seem to fit appropriately! Doubt anyone will use…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printablesjmynheir
Kawasaki KVF650 Prairie Battery Band Strap Bracket 2002-2013 (92072-1406)
Replacement Battery band for 2002-2013 Kawasaki Part number 92072-1406 Category: Automotive
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 0
P
PrintablesGoldenBoyGarage
Kawasaki Damper 92075-091 for rear taillight or others
This should be a mostly accurate reproduction of 92075-091. I didnt have a pristine version to work from, but it worked well enough for me. Currently installed on my bike. Sharing on the off chance that 3d printing and vintage bike…
- Pobrania
- 7
- Polubienia
- 3
- Ocena
- 0
P
PrintablesGoldenBoyGarage
92075-019 Kawasaki Fuel Tank Damper Rubber Grommet H1 Rear Fender ETC
About Have you seen the prices of these stupid things. I am not willing to pay that. This is pretty close but probably a little off as I did not have the actual rubber bit to work from. I was able to work backwards and design one pretty…
- Pobrania
- 5
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCmdr_scotty
LSI 9207-8 4010 cooling fan for single PCI slot size
Redesigned it to be a bit more low profile yet still provide the needed cooling for my card (lsi 9207-8e). Everything now fits within a single PCIe slot which is helpful if the card is getting installed in a tight area between other…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printables
HP LSI 9207-8e 4010 radial fan duct
I needed a low profile fan duct for my HBA card inside my space constraint hp EliteDesk 800 G4 SFF so I created this. It uses an 4010 radial fan (mostly found as part cooling fans for 3d printers). As I only had a 24V fan laying around, I…
P
Printables
Frame fan bracket for LSI 9207-8i / 9217-8i
I needed to mount the card at the bottom PCIE slot on my motherboard but there was 0 free space between the holder and the PSU, which would prevent the Noctua fan from doing its job. I redesigned to hold the fan by the little indents in…