LSI 9207-8i single slot cooler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single slot cooler for LSI SAS HBA - toolless, no supports
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 548
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
I designed this fan shroud because the card really needs some active cooling, but I didn’t want to use a bulky 40 mm axial fan. This model uses a 45 mm blower fan (mine came from an old Anycubic i3 Mega S) and only takes up a single PCIe slot. You can lower the fan speed in your computer’s BIOS settings to significantly reduce noise while still maintaining more than enough cooling performance.
I originally planned to use the existing holes in the card’s PCB, but it turned out that the shroud stays securely in place when clamped onto the heatsink—so I made a version without screw holes.
My print is made from PLA, which isn’t the ideal material. It works fine as long as the fan is functional, but if the fan fails, the heatsink can get quite hot. You may want to use a material with better heat resistance instead.