1 / 3
LSI 9207-8 4010 cooling fan for single PCI slot size — zdjęcie 1
1 / 3

LSI 9207-8 4010 cooling fan for single PCI slot size

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easy to print heatsink for the LSI 9207 series HBA cards. Tested fit on 9207-8e and may also fit the 8i card.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
69
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Redesigned it to be a bit more low profile yet still provide the needed cooling for my card (lsi 9207-8e). Everything now fits within a single PCIe slot which is helpful if the card is getting installed in a tight area between other cards.

Putting this as a remix since I took Benoit_LdL's design as inspiration for my version.

Recommend printing this in ABS or PETG, PLA will deform due to the heat.

Also included are pictures of where I was able to solder in to get +12v from the PCIe rail (after the fuse) and GND on the empty UART header.

Tagi