1 / 4
Lucky Piglet with a Four-Leaf Clover — zdjęcie 1
1 / 4

Lucky Piglet with a Four-Leaf Clover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cute piglet holding a four-leaf clover. 50 mm tall, flat base, single colour.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
8
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A cute little piglet holding a four-leaf clover, double the luck. A sweet good-luck gift for exams, a new job or St. Patrick's Day.

Print notes:

  • Tested on Bambu Lab P2S, 0.4 mm nozzle, PLA

  • 0.12 mm layers, 3 walls, 10% lightning infill

  • Organic tree supports (30 deg) where needed, already set in the 3MF

  • Size: about 40.3 x 44.5 x 49.4 mm

  • The photos show my single-colour white print

How it was made: the base shape was generated with AI, then cleaned up and prepared by hand for printing (mesh repair, flat base, supports and print settings). The cover image is a render of the 3MF in its filament colours; all other photos are real prints from my P2S.

Commercial use: this model is for personal use only (CC BY-NC). If you'd like to sell prints, please send me a message to discuss a commercial license.

☕ Enjoying this model? You can support my work with a coffee: https://buymeacoffee.com/mumakes

Tagi