1 / 6
Trezor One Hex Desk Stand (support-free) — zdjęcie 1
1 / 6

Trezor One Hex Desk Stand (support-free)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Light hexagon-lattice desk stand that holds the original Trezor One at about 60 degrees. Prints without supports.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
4
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A small desk stand for the original Trezor One, the micro-USB one. It holds it at about 60 degrees so you can read the screen and press the buttons while it's plugged in. The pocket is for a 60 x 30 x 7 mm device and there's a slot at the bottom for the cable.

I wanted the sides and the back to be an actual hex lattice and not a plate with hex holes in it. It ended up at about 11.6 g of filament.

The first version needed supports under the ledge. I changed that underside to 45 degrees and turned the hexagons flat-top, so now it prints standing on the two side panels without supports. I've printed it.

Print settings

PLA, 0.2 mm layers, 3 walls, 15% infill, no supports, as the STL is oriented.

Not affiliated with Trezor or SatoshiLabs.

Tagi