Trezor One Hex Desk Stand (support-free)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Light hexagon-lattice desk stand that holds the original Trezor One at about 60 degrees. Prints without supports.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small desk stand for the original Trezor One, the micro-USB one. It holds it at about 60 degrees so you can read the screen and press the buttons while it's plugged in. The pocket is for a 60 x 30 x 7 mm device and there's a slot at the bottom for the cable.
I wanted the sides and the back to be an actual hex lattice and not a plate with hex holes in it. It ended up at about 11.6 g of filament.
The first version needed supports under the ledge. I changed that underside to 45 degrees and turned the hexagons flat-top, so now it prints standing on the two side panels without supports. I've printed it.
Print settings
PLA, 0.2 mm layers, 3 walls, 15% infill, no supports, as the STL is oriented.
Not affiliated with Trezor or SatoshiLabs.