1 / 8
Heavy-Duty Wall Hook for Bags & Coats - Strong, No Supports, No-Drill Option — zdjęcie 1
1 / 8

Heavy-Duty Wall Hook for Bags & Coats - Strong, No Supports, No-Drill Option

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Elegant faceted wall hook that prints on its side for maximum strength. No supports. Screw or no-drill adhesive version.

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
31
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A sturdy, minimalist wall hook with a faceted look: octagonal back plate, angled arm and a V-shaped tip that keeps straps from sliding off. Great for bags, backpacks, jackets, headphones or towels.

Why this version

  • Prints on its side, no supports. The layer lines run along the arm, so the hook is much stronger than one printed upright.

  • Reinforced root: a gusset spreads the load into the back plate, where cheap hooks usually break.

  • Two mounting options: countersunk screw holes, or a no-drill version with a shallow recess for double-sided foam tape / adhesive strips (great for renters).

  • Fully parametric: the OpenSCAD file lets you change reach, arm thickness, width and screw size.

Files

  • wall_hook_single_screws.stl – for 2 screws, 3.5–4 mm (countersunk heads up to 8 mm)

  • wall_hook_single_adhesive.stl – no holes, recess on the back for tape or strips

  • faceted_wall_hook.scad – customize it in the free program OpenSCAD (Window → Customizer)

How to print

  • Print it exactly as exported, lying on its side. No supports needed.

  • PETG recommended for load and heat (PLA works for light items)

  • 4 walls/perimeters, 25–40% infill, 0.2 mm layers

  • Size: 80 mm tall, 26 mm wide, reaches about 50 mm from the wall

Mounting

Screw version: use wall plugs/anchors suitable for your wall. Adhesive version: clean the wall, use strong double-sided mounting tape and wait 24 h before loading. Adhesive is meant for lighter items.

The first images are renders. The last photos show a real print in black PETG.

Remix of the Heavy-Duty Wall Hook by Tms Lht.

Tagi