1 / 8
Heavy-Duty Wall Hook for Bags & Coats - Strong, No Supports, No-Drill Option — image 1
1 / 8

Heavy-Duty Wall Hook for Bags & Coats - Strong, No Supports, No-Drill Option

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Elegant faceted wall hook that prints on its side for maximum strength. No supports. Screw or no-drill adhesive version.

Rating
0 / 5
Likes
0
Downloads
9
Makes
0
Views
22
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A sturdy, minimalist wall hook with a faceted look: octagonal back plate, angled arm and a V-shaped tip that keeps straps from sliding off. Great for bags, backpacks, jackets, headphones or towels.

Why this version

  • Prints on its side, no supports. The layer lines run along the arm, so the hook is much stronger than one printed upright.

  • Reinforced root: a gusset spreads the load into the back plate, where cheap hooks usually break.

  • Two mounting options: countersunk screw holes, or a no-drill version with a shallow recess for double-sided foam tape / adhesive strips (great for renters).

  • Fully parametric: the OpenSCAD file lets you change reach, arm thickness, width and screw size.

Files

  • wall_hook_single_screws.stl – for 2 screws, 3.5–4 mm (countersunk heads up to 8 mm)

  • wall_hook_single_adhesive.stl – no holes, recess on the back for tape or strips

  • faceted_wall_hook.scad – customize it in the free program OpenSCAD (Window → Customizer)

How to print

  • Print it exactly as exported, lying on its side. No supports needed.

  • PETG recommended for load and heat (PLA works for light items)

  • 4 walls/perimeters, 25–40% infill, 0.2 mm layers

  • Size: 80 mm tall, 26 mm wide, reaches about 50 mm from the wall

Mounting

Screw version: use wall plugs/anchors suitable for your wall. Adhesive version: clean the wall, use strong double-sided mounting tape and wait 24 h before loading. Adhesive is meant for lighter items.

The first images are renders. The last photos show a real print in black PETG.

Remix of the Heavy-Duty Wall Hook by Tms Lht.

Tags