Shelly 1PM WiFi Socket Box – Swiss Type 13 (DIY Smart Plug)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hexagonal PETG housing for a Shelly 1PM Gen3 with a Swiss type 13 socket – DIY WiFi smart plug with power metering.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Shelly 1PM WiFi Socket Box – Swiss Type 13
A compact, hexagonal housing that turns a Shelly 1PM Gen3 and a Swiss type 13 socket into a WiFi smart plug with power metering. Designed in FreeCAD, printed in PETG on my Prusa i3 MK3S+ with MMU.
Switch it from your phone (Shelly app), the local web interface, Home Assistant or via webhooks/actions – and see what the connected device actually consumes.
How I use it:
Holiday mode: switch lamps on a schedule so it looks like someone is home
Aquarium or fountain pump on a schedule
In my workshop: a Shelly Button starts the vacuum pump for mold making
Together with security cameras: motion detected → floodlight, siren or motor on
Measuring the power draw of a device, including standby
The cable length is up to you. A surface-mount (screw-on) version is also possible – see the project page.
⚠ IMPORTANT – mains voltage, hobby project
This is a private hobby project. It is NOT CE, ESTI or otherwise certified.
It carries 230 V mains voltage – risk of death if handled improperly. Build and wire it only if you are qualified (electrician) and follow your local regulations.
Max. 10 A (approx. 2300 W): the Shelly is rated 16 A, but the Swiss type 13 socket and type 12 plug are only rated 10 A.
Printed PETG is not a flame-retardant material according to standards. Do not run high loads unattended.
Dry indoor rooms only.
Build and use at your own risk. No liability for damage to persons, devices or buildings.
I am a trained electrician and built it as safely as I could – but that does not replace an official certification.
Parts
1 × Shelly 1PM Gen3 (16 A, WiFi + Bluetooth, power metering)
1 × Swiss socket insert type 13
1 × flexible mains cable 3 × 1.5 mm² (Swiss type TD) with Swiss plug type 12, length as needed
6 × M3 × 6 mm screws for the lid (Ø 2.5 mm pilot holes in the body)
Print settings (0.4 mm nozzle, Prusa MK3S+, PrusaSlicer)
01 Body: PETG, 240 °C / bed 90 °C, 0.20 mm layer, 3 perimeters, 15 % gyroid, supports auto – approx. 70 g, 6 h
02 Bottom lid: PETG, 240 °C / bed 90 °C, 0.20 mm layer, 3 perimeters, 15 % gyroid, supports auto
Size: 76 × 69 × 59 mm (body + lid). Why PETG: more durable than PLA and does not deform in sunlight.
Project page with more pictures and the surface-mount version: repandcreate-mueller.ch
Designed by Repair and Create, Solothurn, Switzerland.
Beschreibung (DE)
Kompaktes Sechseck-Gehäuse, das aus einem Shelly 1PM Gen3 und einer Schweizer Steckdose Typ 13 eine WLAN-Steckdose mit Strommessung macht. Konstruiert in FreeCAD, gedruckt aus PETG auf meinem Prusa i3 MK3S+ mit MMU. Schalten per Shelly-App, lokaler Weboberfläche, Home Assistant oder Webhooks – und dabei den Verbrauch messen.
Einsatzbeispiele: Anwesenheit simulieren in den Ferien, Aquarium- oder Brunnenpumpe, in meiner Werkstatt per Shelly Button die Unterdruckpumpe für den Formenbau, zusammen mit Überwachungskameras Scheinwerfer, Sirene oder Motor schalten, Stromverbrauch messen.
⚠ WICHTIG: Privates Bastelprojekt, NICHT CE-, ESTI- oder anderweitig zertifiziert. Es führt 230 V – Lebensgefahr bei unsachgemässem Umgang. Nachbau und Anschluss nur mit elektrotechnischer Fachkenntnis, geltende Vorschriften einhalten. Maximal 10 A (Steckdose Typ 13 / Stecker Typ 12). PETG ist kein flammhemmender Kunststoff nach Norm – grosse Lasten nicht unbeaufsichtigt betreiben. Nur für trockene Innenräume. Nutzung auf eigene Gefahr, keine Haftung. Als gelernter Elektriker habe ich die Steckdose nach bestem Wissen sicher gebaut – eine offizielle Prüfung ersetzt das nicht.
Teileliste und Druckeinstellungen: siehe oben.