1 / 6
Shelly 1PM WiFi Socket Box – Swiss Type 13 (DIY Smart Plug) — image 1
1 / 6

Shelly 1PM WiFi Socket Box – Swiss Type 13 (DIY Smart Plug)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hexagonal PETG housing for a Shelly 1PM Gen3 with a Swiss type 13 socket – DIY WiFi smart plug with power metering.

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
21
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Shelly 1PM WiFi Socket Box – Swiss Type 13

A compact, hexagonal housing that turns a Shelly 1PM Gen3 and a Swiss type 13 socket into a WiFi smart plug with power metering. Designed in FreeCAD, printed in PETG on my Prusa i3 MK3S+ with MMU.

Switch it from your phone (Shelly app), the local web interface, Home Assistant or via webhooks/actions – and see what the connected device actually consumes.

How I use it:

  • Holiday mode: switch lamps on a schedule so it looks like someone is home

  • Aquarium or fountain pump on a schedule

  • In my workshop: a Shelly Button starts the vacuum pump for mold making

  • Together with security cameras: motion detected → floodlight, siren or motor on

  • Measuring the power draw of a device, including standby

The cable length is up to you. A surface-mount (screw-on) version is also possible – see the project page.

⚠ IMPORTANT – mains voltage, hobby project

This is a private hobby project. It is NOT CE, ESTI or otherwise certified.

  • It carries 230 V mains voltage – risk of death if handled improperly. Build and wire it only if you are qualified (electrician) and follow your local regulations.

  • Max. 10 A (approx. 2300 W): the Shelly is rated 16 A, but the Swiss type 13 socket and type 12 plug are only rated 10 A.

  • Printed PETG is not a flame-retardant material according to standards. Do not run high loads unattended.

  • Dry indoor rooms only.

  • Build and use at your own risk. No liability for damage to persons, devices or buildings.

I am a trained electrician and built it as safely as I could – but that does not replace an official certification.

Parts

  • 1 × Shelly 1PM Gen3 (16 A, WiFi + Bluetooth, power metering)

  • 1 × Swiss socket insert type 13

  • 1 × flexible mains cable 3 × 1.5 mm² (Swiss type TD) with Swiss plug type 12, length as needed

  • 6 × M3 × 6 mm screws for the lid (Ø 2.5 mm pilot holes in the body)

Print settings (0.4 mm nozzle, Prusa MK3S+, PrusaSlicer)

  • 01 Body: PETG, 240 °C / bed 90 °C, 0.20 mm layer, 3 perimeters, 15 % gyroid, supports auto – approx. 70 g, 6 h

  • 02 Bottom lid: PETG, 240 °C / bed 90 °C, 0.20 mm layer, 3 perimeters, 15 % gyroid, supports auto

Size: 76 × 69 × 59 mm (body + lid). Why PETG: more durable than PLA and does not deform in sunlight.

Project page with more pictures and the surface-mount version: repandcreate-mueller.ch
Designed by Repair and Create, Solothurn, Switzerland.

Beschreibung (DE)

Kompaktes Sechseck-Gehäuse, das aus einem Shelly 1PM Gen3 und einer Schweizer Steckdose Typ 13 eine WLAN-Steckdose mit Strommessung macht. Konstruiert in FreeCAD, gedruckt aus PETG auf meinem Prusa i3 MK3S+ mit MMU. Schalten per Shelly-App, lokaler Weboberfläche, Home Assistant oder Webhooks – und dabei den Verbrauch messen.

Einsatzbeispiele: Anwesenheit simulieren in den Ferien, Aquarium- oder Brunnenpumpe, in meiner Werkstatt per Shelly Button die Unterdruckpumpe für den Formenbau, zusammen mit Überwachungskameras Scheinwerfer, Sirene oder Motor schalten, Stromverbrauch messen.

⚠ WICHTIG: Privates Bastelprojekt, NICHT CE-, ESTI- oder anderweitig zertifiziert. Es führt 230 V – Lebensgefahr bei unsachgemässem Umgang. Nachbau und Anschluss nur mit elektrotechnischer Fachkenntnis, geltende Vorschriften einhalten. Maximal 10 A (Steckdose Typ 13 / Stecker Typ 12). PETG ist kein flammhemmender Kunststoff nach Norm – grosse Lasten nicht unbeaufsichtigt betreiben. Nur für trockene Innenräume. Nutzung auf eigene Gefahr, keine Haftung. Als gelernter Elektriker habe ich die Steckdose nach bestem Wissen sicher gebaut – eine offizielle Prüfung ersetzt das nicht.

Teileliste und Druckeinstellungen: siehe oben.

Tags