Battery Holder for Makita 18V & 40Vmax - Compact Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact wall holder that fits both Makita 18V LXT and 40Vmax XGT batteries. Only 24.5 mm deep. 1, 2 and 3 bays.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
Every bay fits both Makita battery systems.
I care about how this one looks as well as how it works. A pair of grooves takes both 18V LXT and 40Vmax XGT packs, with no stepped rails and no moving parts. That makes it much more compact than the usual bulky dual-battery holders. The holder itself is only 24.5 mm deep, so it stays neat on a wall, on the edge of a shelf or on the side of a workbench.
An 18V pack is held at three points: the angled ramp inside the groove, the ramp on the end lug, and the battery's own latch. These points help keep it from rattling.
Sizes
1-bay: 84 x 24.5 x 57 mm, 2 M4 screws, about 41 g, print time about 1 h 55 min
2-bay: 168 x 24.5 x 57 mm, 4 M4 screws, about 80 g, print time about 3 h 20 min
3-bay: 252 x 24.5 x 57 mm, 6 M4 screws, about 120 g, print time about 5 h 5 min
Weights and print times are Bambu Studio estimates for the A1 with the settings in the included 3mf files.
The 1-bay holds one battery. You can also mount several side by side.
Mounting
Each bay has 2 M4 screw holes, 50 mm apart center to center, with their centers 12 mm below the top edge.
The holes are counterbored. Screw heads up to 2.8 mm tall sit below the groove floor. Use truss-head screws (9 mm head diameter) or pan-head screws with a 9 mm washer.
The screw passes through 5.8 mm of the holder. Add that to the depth needed in your wall to choose the screw length.
Do not use countersunk screws. They can wedge the hole apart and crack the holder.
Mount into solid wood, or use anchors rated for at least 10 kg each. This is advice on the fixing method, not a load rating for the holder. Screws are not included.
Printing
PETG recommended. 0.2 mm layers, 6 walls, 25% infill, tree supports from the build plate only. All of this is already set in the 3mf files.
Place the flat top face on the build plate. The 3mf files are already oriented this way.
Keep the 6 walls. They put more material around the screw holes and counterbores.
Bed size: the 1-bay and 2-bay fit the A1 mini (180 mm). The 3-bay is 252 mm long and needs an A1 or larger; the included 3mf places it at an angle on the plate.
Files: 3mf for 1-bay A1, 2-bay A1, 2-bay A1 mini and 3-bay A1, plus STL and STEP for all three sizes.
Tested
I checked insertion, latch engagement and release with BL1860B (18V 6.0Ah), BL4040 (40Vmax 4.0Ah) and BL4025 (40Vmax 2.5Ah) packs. I printed all three sizes and screwed holders to a shelf in my workshop.
How this was made
Designed, printed and tested by me. AI tools helped with the CAD scripts. This is not an AI-generated mesh.
Disclaimer
This is not a genuine Makita product. It is an independent design made to fit Makita 18V LXT / 40Vmax XGT batteries. Makita is a trademark of Makita Corporation. I am not affiliated with, authorized or endorsed by Makita Corporation.
A battery can fall from a wall-mounted holder. I make no claims about how much load it will hold. Do not mount it above people or above anything a falling battery could damage. I accept no liability for dropped or damaged batteries, or for any damage or injury arising from its use.
Licensed under the Standard Digital File License shown on this page.
────────
マキタの 18V と 40Vmax、どちらも入る薄型の壁付けホルダー
見た目にもこだわって設計しました。2本の溝で 18V(LXT)と 40Vmax(XGT)の両方を受けます。段差のレールも動く部品もないので、従来の大きな兼用ホルダーよりかなりコンパクトです。奥行きはホルダー本体で 24.5 mm です。壁、棚の小口、作業台の横にビスで留めて、上からバッテリーを差し込みます。1連・2連・3連が入っています。
18V は、溝の内側の坂、端の突起の坂、バッテリー側のロックの3点で押さえ、がたつきを抑えます。
サイズ
1連 84 × 24.5 × 57 mm、M4ビス2本、約 41 g、印刷 約 1時間55分
2連 168 × 24.5 × 57 mm、M4ビス4本、約 80 g、印刷 約 3時間20分
3連 252 × 24.5 × 57 mm、M4ビス6本、約 120 g、印刷 約 5時間5分
重さと時間は、付属の 3mf の設定で A1 の場合の Bambu Studio の計算です。1連は横に並べて付けることもできます。
取付
1連ごとに M4 のビス穴が2つあります。穴の芯の間隔は 50 mm、穴の芯は上端から 12 mm です。
座ぐりがあり、頭の高さ 2.8 mm までのビスは溝の底から出ません。トラス頭(頭の直径 9 mm)か、なべ頭+直径 9 mm のワッシャーをお使いください。
ビスはホルダーの肉 5.8 mm を通ります。壁に入れる長さに足してビスの長さを選んでください。
皿ビスは、頭のくさびで穴が広がり、割れることがあるので使わないでください。
壁側は木の下地か、1本あたり 10 kg 以上のアンカーをお使いください。これは留め方の目安で、ホルダーの耐荷重ではありません。ビスは付属しません。
印刷
PETG 推奨。0.2 mm、壁6周、充填 25%、ツリーサポート(造形板からのみ)。設定は 3mf に入っています。
平らな天面を造形板に付けます。3mf はその向きで入っています。
壁6周は減らさないでください。ビス穴と座ぐりのまわりの肉を増やすためです。
1連と2連は A1 mini(180 mm)に載ります。3連は 252 mm あるので A1 以上が要ります。付属の 3mf では斜めに置いてあります。
ファイル:3mf は 1連 A1、2連 A1、2連 A1 mini、3連 A1。STL と STEP は3サイズ分あります。
確認
BL1860B(18V 6.0Ah)、BL4040(40Vmax 4.0Ah)、BL4025(40Vmax 2.5Ah)で、差し込み・ロックの掛かり・取り外しを確認しました。3つの大きさとも実際に刷り、作業場の棚にビスで付けました。
作り方
設計・印刷・確認は私がしています。CAD の手順に AI の手を借りました。AI で生成した形ではありません。
注意
純正品ではありません。マキタの 18V LXT / 40Vmax XGT バッテリーに合うように独自に設計した物です。「マキタ」「Makita」は株式会社マキタの商標です。株式会社マキタとの提携・許諾・推奨の関係はありません。
落下の危険があります。人の上や、落ちて困る物の上には付けないでください。どれだけの重さに耐えるかは保証できません。バッテリーの落下・破損、その他使用によって生じたいかなる損害についても責任を負いません。
ライセンスはこのページの Standard Digital File License です。