M-Vave FM-1 Snap-Fit Backplate for Making Accessories, Cases, Holders, etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is essentially a cube with cutouts for the M-Vave FM-1's speaker and ports, with pins that fit in the screw holes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use this as a base for anything I've made that holds the M-Vave FM-1 pocket synthesizer.
Using this fantastic model of the FM-1 as a negative part, along with a cutout for the speaker and ports, I was able to make what is essentially a negative that fits the back of the FM-1 with a very tight grip.
The cutout for the speaker also acts as a means of releasing it when using the screw hole pins in your model. You do not need to use the entire model to get a solid grip on the device. Cutting the top off above the two side screw pins has resulted in models that can still hold it confidently.