M-Vave FM-1 Snap-Fit Backplate for Making Accessories, Cases, Holders, etc.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is essentially a cube with cutouts for the M-Vave FM-1's speaker and ports, with pins that fit in the screw holes.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I use this as a base for anything I've made that holds the M-Vave FM-1 pocket synthesizer.
Using this fantastic model of the FM-1 as a negative part, along with a cutout for the speaker and ports, I was able to make what is essentially a negative that fits the back of the FM-1 with a very tight grip.
The cutout for the speaker also acts as a means of releasing it when using the screw hole pins in your model. You do not need to use the entire model to get a solid grip on the device. Cutting the top off above the two side screw pins has resulted in models that can still hold it confidently.