Sunny Cable Clip - Fried Egg Cable Holder (S/M/L) - Multicolor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sunny side up, cable side down! A cute fried-egg cable clip in 3 sizes. Prints flat, no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NEW - MULTI-COLOUR READY: FullColor.3mf files are pre-painted in 2-3 colours (egg white, yolk, face) for Bambu AMS / AMS lite, Prusa MMU3, Creality CFS and other multi-colour systems. EasyColor.3mf files change colour by height (white egg, yellow yolk from 8 mm) and work on ANY printer with one colour change. Single-colour STLs are still included. The colour files were checked by slicing, not yet test-printed in colour. Colour pictures are 3D renders.
Sunny side up, cable side down! A fried-egg clip that sticks to your desk, wall or monitor and keeps one cable neatly in place. Part of our Breakfast Desk Collection.
3 sizes in one download: S (cables up to 3.5 mm), M (up to 5 mm), L (up to 7 mm). The cable runs through a tunnel under the yolk and can enter from either side. Mount with double-sided tape (e.g. 3M VHB) on the flat bottom.
Print settings: flat on the bed, no supports. 0.2 mm layers, 3 walls, 20% infill, PLA or PETG. About 8 g each (estimate). For two colours, change filament at the yolk height (8 mm; 10 mm for L) or paint the yolk.
Honest note: the files are checked digitally (watertight, manifold, wall thickness) but have not been test-printed by me yet. Pictures are 3D renders. Designed with AI-assisted tools. If you print one, please post a Make!