Blanking cap for gauge cups and holes, 52 mm and 60 mm – free
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plug for an empty 52 or 60 mm gauge hole. Crush ribs hold it without glue; prints in minutes, no supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Closes an empty 52 or 60 mm gauge hole, e.g. in a two-gauge panel while only one gauge is fitted.
A blanking cap for empty gauge holes: you have a panel for two or three gauges but only one fitted so far? Or a pod stays empty for a while? The cap plugs into the hole and looks like a lid the size of the cup rim.
Two sizes: for 52 mm holes (52.8 mm) and 60 mm holes (60.4 mm), as used in our models.
Crush ribs hold the cap without glue; it pulls out again.
Also fits other cups and panels with the same hole.
Prints in a few minutes, without supports.
Free, because it is useful on its own and complements every one of our panels.
Variants (all included)
for 52 mm bore
for 60 mm bore
Gauge bore: 52.79 mm (52 mm gauges, +0.4 mm clearance).
Included
STL, 3MF and STEP for every variant
52 mm tolerance test ring – print it first
README with print settings and installation (EN/DE)
Safety
Print in ASA or ABS for the top of the dashboard (sun). No PLA.
Fit
Too tight: file the ribs lightly. Too loose: wrap a strip of tape around the plug.
FAQ
Which size do I need? The size of the hole: 52 mm for gauges with a 52 mm housing, 60 mm for 60 mm housings.
How it's made
Parametric CAD (build123d, Python), exact solids. The CAD code was written with an AI assistant and checked by us; no AI-generated meshes. Renders are made from the CAD in Blender.
License
CC BY-NC 4.0: you may share and adapt it for non-commercial purposes, as long as you credit Magmacode and link the license (https://creativecommons.org/licenses/by-nc/4.0/). Commercial sale of printed parts only by written agreement with Magmacode.
Not an original part, no affiliation with any vehicle manufacturer.
