1 / 4
Blanking cap for gauge cups and holes, 52 mm and 60 mm – free — image 1
1 / 4

Blanking cap for gauge cups and holes, 52 mm and 60 mm – free

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Plug for an empty 52 or 60 mm gauge hole. Crush ribs hold it without glue; prints in minutes, no supports.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
8
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

Closes an empty 52 or 60 mm gauge hole, e.g. in a two-gauge panel while only one gauge is fitted.

A blanking cap for empty gauge holes: you have a panel for two or three gauges but only one fitted so far? Or a pod stays empty for a while? The cap plugs into the hole and looks like a lid the size of the cup rim.

  • Two sizes: for 52 mm holes (52.8 mm) and 60 mm holes (60.4 mm), as used in our models.

  • Crush ribs hold the cap without glue; it pulls out again.

  • Also fits other cups and panels with the same hole.

  • Prints in a few minutes, without supports.

Free, because it is useful on its own and complements every one of our panels.

Variants (all included)

  • for 52 mm bore

  • for 60 mm bore

Gauge bore: 52.79 mm (52 mm gauges, +0.4 mm clearance).

Included

  • STL, 3MF and STEP for every variant

  • 52 mm tolerance test ring – print it first

  • README with print settings and installation (EN/DE)

Safety

Print in ASA, PA12 or ABS for the top of the dashboard (sun). No PETG, no PLA: the interior gets very hot even in the shade.

Fit

Too tight: file the ribs lightly. Too loose: wrap a strip of tape around the plug.

FAQ

Which size do I need? The size of the hole: 52 mm for gauges with a 52 mm housing, 60 mm for 60 mm housings.

How it's made

Parametric CAD (build123d, Python), exact solids. The CAD code was written with an AI assistant and checked by us; no AI-generated meshes. Renders are made from the CAD in Blender.

License

Personal use only. Please do not resell the files or printed parts. Not an original part, no affiliation with any vehicle manufacturer.


Deutsch: Verschließt eine leere 52- oder 60-mm-Instrumentenbohrung, z. B. in einer Blende für zwei Instrumente, solange erst eines verbaut ist. Alle Varianten als STL/3MF/STEP, Testring und Anleitung DE/EN enthalten. Private Nutzung, kein Weiterverkauf von Dateien oder Drucken.

Settings

  • Material: ASA (or PA12, ABS). No PETG, no PLA – the interior gets very hot, even in the shade.

  • Layer height 0.2 mm, 4 walls, 20 % infill, no supports.

  • Orientation: Disc (visible side) down on the bed, plug pointing up.

  • Print time approx. 0 h 56 min, about 8 g (default variant).

  • Print the 52 mm tolerance test ring first to check the gauge fit on your printer.

Installation 1. Press the cap straight into the empty hole. To remove it, lever at the edge.

Tags