Sock drawer grid for Howdens 500 mm standard drawer units: 18 cells and 6 long lanes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Open-wall sock dividers in four bed-sized tiles: 18 cells at the front, 6 long lanes behind. No base.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sock dividers for the shallow drawer in a Howdens 500 mm standard drawer unit (inside 434 × 434 mm). Four tiles fill the drawer, so nothing slides, and there's no base, so it uses very little plastic.
Front: 18 cells, about 72 × 80 mm, for everyday socks.
Back: 6 long lanes, about 72 × 193 mm, for socks you rarely need. Drop them in at the front end and slide them back.
55 mm high, so it sits below the drawer's 66 mm sides.
The front tiles have a window in the outer wall to clear the drawer-front brackets. That window hasn't been printed yet: I cut mine by hand.
For other drawers, change the values at the top of
sock_grid.scad.
Print: the front-left and front-right tiles once each and the back tile twice. Each fits a 256 mm bed.
Print settings
PETG, dried first, 0.20 mm layers, no supports. The walls are two 0.42 mm lines. About 295 g for all four.
Found this useful? You can buy me a coffee or sponsor me on GitHub.