1 / 3
Sock drawer grid for Howdens 500 mm standard drawer units: 18 cells and 6 long lanes — image 1
1 / 3

Sock drawer grid for Howdens 500 mm standard drawer units: 18 cells and 6 long lanes

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Open-wall sock dividers in four bed-sized tiles: 18 cells at the front, 6 long lanes behind. No base.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
10
Reviews
0

Updated at source:

Model information

Category
Bedroom
License
Creative Commons — Attribution — Noncommercial — Share Alike

Sock dividers for the shallow drawer in a Howdens 500 mm standard drawer unit (inside 434 × 434 mm). Four tiles fill the drawer, so nothing slides, and there's no base, so it uses very little plastic.

  • Front: 18 cells, about 72 × 80 mm, for everyday socks.

  • Back: 6 long lanes, about 72 × 193 mm, for socks you rarely need. Drop them in at the front end and slide them back.

  • 55 mm high, so it sits below the drawer's 66 mm sides.

  • The front tiles have a window in the outer wall to clear the drawer-front brackets. That window hasn't been printed yet: I cut mine by hand.

  • For other drawers, change the values at the top of sock_grid.scad.

Print: the front-left and front-right tiles once each and the back tile twice. Each fits a 256 mm bed.

Print settings

PETG, dried first, 0.20 mm layers, no supports. The walls are two 0.42 mm lines. About 295 g for all four.

Found this useful? You can buy me a coffee or sponsor me on GitHub.

Tags