D405 Mount for SO101 Robotic Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
https://www.paypal.com/donate/?hosted_button_id=NFFEPLZ8PU7RA
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Intel RealSense D405 Mount for SO-101 Robotic Arm
A custom mount for attaching the Intel RealSense D405 depth camera to the popular SO-101 robotic arm.
Required hardware
4 × M3 bolts
2 × M3 nuts
Screw supports
The model includes printable screw supports to accommodate variations in bolt length.
You can print these supports at different heights to compensate for bolts that are slightly longer than required. This works for reasonable length variations of approximately 3–8 mm.
Printing instructions
Print the mount with its larger flat face placed directly on the build plate, as shown in the picture.
Donate
If you found this useful, consider donating using the following link:
https://www.paypal.com/donate/?hosted_button_id=NFFEPLZ8PU7RA