1 / 2
Café Table Napkin Holder with Diamond Pattern (standard + large) — zdjęcie 1
1 / 2

Café Table Napkin Holder with Diamond Pattern (standard + large)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sturdy napkin holder for café, restaurant or home tables. Diamond windows, finger dip, 2 sizes. Upright, no supports.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
2
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Café Table Napkin Holder, designed by Kalfa Garage.

A clean, sturdy napkin holder for café and restaurant tables or your kitchen. Napkins stand upright between two walls with a plain geometric diamond pattern, and a finger dip in the middle of each wall makes the top napkin easy to pull out.

Standard: 150 x 50 x 78 mm, fits folded napkins up to about 138 mm wide (typical 120-135 mm café napkins). Large: 185 x 50 x 78 mm, for lunch or dinner napkins up to about 173 mm. The 42 mm gap holds about 40-60 thin napkins.

Details: 4 mm walls and base, 5 mm inner fillets for strength, rounded top corners, 16 mm finger dip. The tall diamond windows have 62-degree sides, so they print cleanly without supports.

Print settings: print upright on its base as exported. No supports. PLA or PETG (PETG if you wipe it often), 0.2 mm layers, 0.4 mm nozzle, 3 walls, 20% infill. Wipe clean with a damp cloth.

Estimates from the mesh (not sliced): about 123 g (standard) and 155 g (large), roughly 4-6 h.

Note: the images are renders, not photos of a print. Made with AI-assisted tools.

Tagi