Café Table Napkin Holder with Diamond Pattern (standard + large)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sturdy napkin holder for café, restaurant or home tables. Diamond windows, finger dip, 2 sizes. Upright, no supports.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 2
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Café Table Napkin Holder, designed by Kalfa Garage.
A clean, sturdy napkin holder for café and restaurant tables or your kitchen. Napkins stand upright between two walls with a plain geometric diamond pattern, and a finger dip in the middle of each wall makes the top napkin easy to pull out.
Standard: 150 x 50 x 78 mm, fits folded napkins up to about 138 mm wide (typical 120-135 mm café napkins). Large: 185 x 50 x 78 mm, for lunch or dinner napkins up to about 173 mm. The 42 mm gap holds about 40-60 thin napkins.
Details: 4 mm walls and base, 5 mm inner fillets for strength, rounded top corners, 16 mm finger dip. The tall diamond windows have 62-degree sides, so they print cleanly without supports.
Print settings: print upright on its base as exported. No supports. PLA or PETG (PETG if you wipe it often), 0.2 mm layers, 0.4 mm nozzle, 3 walls, 20% infill. Wipe clean with a damp cloth.
Estimates from the mesh (not sliced): about 123 g (standard) and 155 g (large), roughly 4-6 h.
Note: the images are renders, not photos of a print. Made with AI-assisted tools.