Tabletop Mini Bases 25/32/40/50 mm with Magnet Pockets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Four round mini bases (25, 32, 40, 50 mm), 3 mm tall, with a 5 mm magnet pocket underneath.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 1
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
Round bases for tabletop games (D&D and similar) in the four common sizes: 25, 32, 40 and 50 mm. Each base is 3 mm tall with a pocket underneath for a 5 x 1 mm disc magnet, so minis can be stored on a steel sheet or swapped between bases. Files: one STL per size, plus all four together as STL and 3MF. PRINT SETTINGS: any FDM printer, 0.2 mm layers, 3 perimeters, 15% infill, no supports. Print with the magnet pocket facing up, pause at the pocket top, press the magnet in, then resume (or print pocket-down and glue the magnet in). Magnet: 5 x 1 mm disc (pocket is 5.2 x 1.2 mm). Check polarity before gluing. Material: PLA or PETG. All four models were checked watertight (single shell, no non-manifold edges). Made with Mini Base Maker for Blender: https://superhivemarket.com/products/mini-base-maker