Riser feet/shock absorbers for the turntable NUMARK TTX II
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To raise and absorb vibrations. source files availables to adapt the model.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You'll find explanations in french on my website : https://labidulerie.vicou.be/pied-amortisseur-rehausseur-pour-platine-vynile-impression-3d-tpu/
I needed to raise my turntable so that it would be accessible above the edge of a piece of furniture!
Initially, I printed some feet using matte PLA, measuring 80 mm in diameter and 22 mm in height.
Later on, I needed to raise it even further!
That is why I printed this second set of feet using TPU, which also helps to dampen vibrations.
These are 84 mm in diameter and feature a rim to ensure the turntable's feet remain perfectly centered. Additionally, they are designed with hemispherical protrusions on the underside for contact with the supporting surface.