Riser feet/shock absorbers for the turntable NUMARK TTX II
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To raise and absorb vibrations. source files availables to adapt the model.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You'll find explanations in french on my website : https://labidulerie.vicou.be/pied-amortisseur-rehausseur-pour-platine-vynile-impression-3d-tpu/
I needed to raise my turntable so that it would be accessible above the edge of a piece of furniture!
Initially, I printed some feet using matte PLA, measuring 80 mm in diameter and 22 mm in height.
Later on, I needed to raise it even further!
That is why I printed this second set of feet using TPU, which also helps to dampen vibrations.
These are 84 mm in diameter and feature a rim to ensure the turntable's feet remain perfectly centered. Additionally, they are designed with hemispherical protrusions on the underside for contact with the supporting surface.