1 / 4
Antenna Housing for the Prusa OpenPrintTag upgrade for CORE One/L — zdjęcie 1
1 / 4

Antenna Housing for the Prusa OpenPrintTag upgrade for CORE One/L

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Antenna housing to relocate the antenna of the Prusa OpenPrintTag upgrade for CORE One/L.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
50
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Antenna housing to relocate the antenna of the Prusa OpenPrintTag upgrade for CORE One/L.
I used it to put the antenna on my Core Ones side door, which allows it to read OpenPrintTags inside the spool holder and in a dry box next to the printer.

Use double sided tape to mount it.
It is also necessary to extend the cable, preferably by desoldering it from the antenna and soldering an extension between the plug and the antenna.


Made to be used it in combination with:

Also added an extended version, so you can cut it to size and use it with other drybox upgrades.

Tagi