1 / 3
Anti-tip base for BWT bestmax PREMIUM S water filter (FS22P00A00) — zdjęcie 1
1 / 3

Anti-tip base for BWT bestmax PREMIUM S water filter (FS22P00A00)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flared 140 mm base that stops a BWT bestmax PREMIUM S filter (85 mm) from tipping over. Parametric OpenSCAD included.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
4
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

My BWT bestmax PREMIUM S water filter (type FS22P00A00, 85 mm diameter) is tall and narrow and kept falling over. This base fixes that: the filter drops into a 27 mm deep cup, and a 45-degree flare widens the footprint to 140 mm.

Dimensions

  • Bore 86.2 mm (0.6 mm clearance on an 85 mm filter); the filter slides in by hand, with a chamfer at the mouth to guide it

  • Cup depth 27 mm, floor 3 mm, wall 3 mm, total height 30 mm

  • Foot 140 mm across

  • Closed floor to catch drips

  • Four 12 mm x 0.6 mm pockets underneath for self-adhesive rubber feet

Other filter sizes

The OpenSCAD file is parametric. Measure your filter and change filter_d (diameter), sleeve_h (cup depth) and foot_d (footprint). Set drain_d to add a drain hole, or feet = false to remove the feet pockets.

Print settings (as printed)

  • PLA+ (Sunlu PLA+ Black), 0.15 mm layers, Prusa CORE One with a 0.4 nozzle

  • 3 perimeters, 15% gyroid infill

  • No supports, no brim; prints upright as modelled

  • About 2 h 45 min and 82 g

It has been printed and tested: the filter fits and no longer tips over.

This is not an official BWT product.

Tagi