Anti-tip base for BWT bestmax PREMIUM S water filter (FS22P00A00)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flared 140 mm base that stops a BWT bestmax PREMIUM S filter (85 mm) from tipping over. Parametric OpenSCAD included.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
My BWT bestmax PREMIUM S water filter (type FS22P00A00, 85 mm diameter) is tall and narrow and kept falling over. This base fixes that: the filter drops into a 27 mm deep cup, and a 45-degree flare widens the footprint to 140 mm.
Dimensions
Bore 86.2 mm (0.6 mm clearance on an 85 mm filter); the filter slides in by hand, with a chamfer at the mouth to guide it
Cup depth 27 mm, floor 3 mm, wall 3 mm, total height 30 mm
Foot 140 mm across
Closed floor to catch drips
Four 12 mm x 0.6 mm pockets underneath for self-adhesive rubber feet
Other filter sizes
The OpenSCAD file is parametric. Measure your filter and change filter_d (diameter), sleeve_h (cup depth) and foot_d (footprint). Set drain_d to add a drain hole, or feet = false to remove the feet pockets.
Print settings (as printed)
PLA+ (Sunlu PLA+ Black), 0.15 mm layers, Prusa CORE One with a 0.4 nozzle
3 perimeters, 15% gyroid infill
No supports, no brim; prints upright as modelled
About 2 h 45 min and 82 g
It has been printed and tested: the filter fits and no longer tips over.
This is not an official BWT product.
