Vevor Lathe Gearbox Spacer Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vevor Lathe Gearbox Spacer Fix. The idea of adding spacers to make the gearbox safe to use is from…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Vevor Lathe Gearbox Spacer Fix.
The idea of adding spacers to make the gearbox safe to use is from https://www.thingiverse.com/reynol32
It is NOT required to disassemble the gearbox to install the spacers. However I strongly recommend to take the gearbox apart, clean it up, check all parts, remove burs. On my lathe one of the keys (3x3x30) was broken. I had to create a new one from scratch since I could not resource it easily.
It is NOT required to remove the bushing for removing the axle (this concerns the axle where the spacers are added); the trick is to move the reverse gear so that the key (3x3x25) can be pulled out. Once that is done, the axle can be pushed out.
Required Printed parts:
- spacer_screw_nokeyway_5_left (1x)
- spacer_screw_nokeyway_5_right.stl (1x)
- spacer_screw_nokeyway_8_left (1x)
- spacer_screw_nokeyway_8_right.stl (1x)
Required other parts
- hex screw M2x8 (4x)
- knurl nut M2x5 (4x)
Recommended materials:
- ABS 50% infill (time will tell if ABS was the correct choice)
Category: Machine Tools