1 / 12
60% keyboard case with plate for BM60 RGB Poker V2 — zdjęcie 1
1 / 12

60% keyboard case with plate for BM60 RGB Poker V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Split skeletonized BM60-family case with a Poker-layout plate and flush drop-in interlocks.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

This upload contains a split, skeletonized 60% keyboard case and a matching split 2 mm plate. Both parts use flush, vertically seated dovetail-style interlocks so the halves can be printed separately and assembled with their undersides flush.

Compatibility

CASE: The case is intended for the BM60 family and other compatible GH60-style 60% tray-mount PCBs. Check your PCB's USB position and mounting-hole pattern before printing if it is not a BM60 RGB Poker V2.

PLATE: The included plate is only for the Poker-layout BM60 RGB Poker V2. It is not a universal plate for every BM60-family layout. The plate preserves the original 285.374 x 94.926 x 2.0 mm envelope and all 65 original switch, stabilizer, and mounting openings.

Included files

- Left and right skeletonized case halves

- Left and right print-oriented 2 mm Poker plate halves

- Combined QIDI Studio 3MF project for the case

- Reference and completed-build photos

Hardware and heat-set inserts

- Heat-set inserts are NOT required for this release.

- The case bosses have approximately 2.0 mm pilot bores and are designed to use the keyboard's original M2 tray-mount screws directly in the printed plastic.

- Start with M2 x 4 mm screws. Use M2 x 5 mm only if your PCB/plate stack requires the extra engagement, and verify that the screw does not bottom out.

- Do not force brass inserts into the existing bosses. A typical optional M2 heat-set insert is approximately 3.2 mm outside diameter x 4 mm long, which is not compatible with the current 2.0 mm bores. An insert-equipped version would require the bosses and bore diameter to be revised for the exact insert manufacturer's specification before printing.

- You will still need a compatible BM60-family PCB, switches, stabilizers, keycaps, USB cable, and the appropriate M2 mounting screws. The included plate specifically requires the Poker layout.

Assembly and printing notes

- The case and plate halves seat vertically; align the male tabs above the female sockets and lower them into place.

- The plate uses three 6 mm-reach drop-in locks with 0.20 mm socket clearance.

- Dry-fit every interlock before using adhesive or permanently installing the electronics.

- Use good first-layer calibration and elephant-foot compensation so the sockets remain clear.

- The oval openings in the skeletonized case are intentional weight-reduction and ventilation features. The rear rounded opening provides USB access.

- The case and plate have been physically assembled as shown in the photos. Long-term joint strength has not been characterized; dry-fit before adhesive.

Search tags

60% keyboard case; 60 percent keyboard case; 60% keyboard plate; 60 percent keyboard plate; BM60 case; BM60 RGB; Poker V2; GH60 case; mechanical keyboard case; split keyboard case; skeletonized keyboard case; Poker keyboard plate.

Attribution

The case is a significant modification of the BM60/GH60 case by Thingiverse user Niemnic (Thingiverse model 6129147), originally licensed CC BY-SA. This version adds organic skeletonization, a split seam, and flush interlocking joints. The plate is a split interlocking modification of the supplied 60-Percent_Standard_Plate_2mm.stl source.

Tagi