60% keyboard case with plate for BM60 RGB Poker V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Split skeletonized BM60-family case with a Poker-layout plate and flush drop-in interlocks.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This upload contains a split, skeletonized 60% keyboard case and a matching split 2 mm plate. Both parts use flush, vertically seated dovetail-style interlocks so the halves can be printed separately and assembled with their undersides flush.
Compatibility
CASE: The case is intended for the BM60 family and other compatible GH60-style 60% tray-mount PCBs. Check your PCB's USB position and mounting-hole pattern before printing if it is not a BM60 RGB Poker V2.
PLATE: The included plate is only for the Poker-layout BM60 RGB Poker V2. It is not a universal plate for every BM60-family layout. The plate preserves the original 285.374 x 94.926 x 2.0 mm envelope and all 65 original switch, stabilizer, and mounting openings.
Included files
- Left and right skeletonized case halves
- Left and right print-oriented 2 mm Poker plate halves
- Combined QIDI Studio 3MF project for the case
- Reference and completed-build photos
Hardware and heat-set inserts
- Heat-set inserts are NOT required for this release.
- The case bosses have approximately 2.0 mm pilot bores and are designed to use the keyboard's original M2 tray-mount screws directly in the printed plastic.
- Start with M2 x 4 mm screws. Use M2 x 5 mm only if your PCB/plate stack requires the extra engagement, and verify that the screw does not bottom out.
- Do not force brass inserts into the existing bosses. A typical optional M2 heat-set insert is approximately 3.2 mm outside diameter x 4 mm long, which is not compatible with the current 2.0 mm bores. An insert-equipped version would require the bosses and bore diameter to be revised for the exact insert manufacturer's specification before printing.
- You will still need a compatible BM60-family PCB, switches, stabilizers, keycaps, USB cable, and the appropriate M2 mounting screws. The included plate specifically requires the Poker layout.
Assembly and printing notes
- The case and plate halves seat vertically; align the male tabs above the female sockets and lower them into place.
- The plate uses three 6 mm-reach drop-in locks with 0.20 mm socket clearance.
- Dry-fit every interlock before using adhesive or permanently installing the electronics.
- Use good first-layer calibration and elephant-foot compensation so the sockets remain clear.
- The oval openings in the skeletonized case are intentional weight-reduction and ventilation features. The rear rounded opening provides USB access.
- The case and plate have been physically assembled as shown in the photos. Long-term joint strength has not been characterized; dry-fit before adhesive.
Search tags
60% keyboard case; 60 percent keyboard case; 60% keyboard plate; 60 percent keyboard plate; BM60 case; BM60 RGB; Poker V2; GH60 case; mechanical keyboard case; split keyboard case; skeletonized keyboard case; Poker keyboard plate.
Attribution
The case is a significant modification of the BM60/GH60 case by Thingiverse user Niemnic (Thingiverse model 6129147), originally licensed CC BY-SA. This version adds organic skeletonization, a split seam, and flush interlocking joints. The plate is a split interlocking modification of the supplied 60-Percent_Standard_Plate_2mm.stl source.