Subtle door handle for Core One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small subtle door handle for Core One with hidden magnets.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Ever since my original orange door handle fell off, I've liked the look of my Core One much more. Unfortunately, the ergonomics of the door without a handle are not great.
This tiny, subtle door handle is barely noticable when printed in black. It uses the existing holes in the door panel, so it can be instaled without any modifications. Inside the handle, there are pockets for two large 15×2 mm magnets. They need to be this large because they have to work through the door panel, as they are on the wrong side of it. The benefits are that the magnets are hidden and held securely in place.
To install the two handles, you will need:
2× M3 countersunk or flat-head screws, 8–10 mm long
2× M3 heat-set insert
4× Magnets 15x2 mm
I printed the handles in black Prusament PC Blend, but any material will do. No supports are required.