Louder ESP32-S3 Rev J2 – Compact Friction-Fit Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact 3D-printable enclosure designed for the Sonocotta Louder ESP32-S3 Rev J2 audio amplifier board.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Louder ESP32-S3 Rev J2 – Compact Friction-Fit Case
A compact, 3D-printable enclosure designed specifically for the Sonocotta Louder ESP32-S3 Rev J2 audio amplifier board.
Features
Two-piece design: base and removable lid
Tool-free friction-fit closure with 4 rounded retention bumps
No screws required to secure the lid
4 integrated PCB mounting posts
Dedicated openings for all 3 screw terminals
Access to both onboard buttons
USB-C and DC power connector openings
Ventilation slots
Recommended print settings
Material: PETG
Layer height: 0.20 mm
Perimeters: 3
Infill: 20%
Printer tested: Prusa CORE One+ Gen2
Assembly
Print the base and lid.
Install the Louder ESP32-S3 Rev J2 PCB.
Press the lid into place.
The four rounded retention bumps hold the lid securely without screws.
Compatibility
Designed and physically tested with the Louder ESP32-S3 Rev J2.
Other PCB revisions may require adjustments.
Credits
Based on the official Sonocotta hardware documentation and PCB layout.
https://github.com/sonocotta/esp32-audio-dock
Independent community-designed enclosure, not an official Sonocotta product.
