1 / 1
Louder ESP32-S3 Rev J2 – Compact Friction-Fit Case — image 1

Louder ESP32-S3 Rev J2 – Compact Friction-Fit Case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A compact 3D-printable enclosure designed for the Sonocotta Louder ESP32-S3 Rev J2 audio amplifier board.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
17
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

Louder ESP32-S3 Rev J2 – Compact Friction-Fit Case

A compact, 3D-printable enclosure designed specifically for the Sonocotta Louder ESP32-S3 Rev J2 audio amplifier board.

Features

  • Two-piece design: base and removable lid

  • Tool-free friction-fit closure with 4 rounded retention bumps

  • No screws required to secure the lid

  • 4 integrated PCB mounting posts

  • Dedicated openings for all 3 screw terminals

  • Access to both onboard buttons

  • USB-C and DC power connector openings

  • Ventilation slots

Recommended print settings

  • Material: PETG

  • Layer height: 0.20 mm

  • Perimeters: 3

  • Infill: 20%

  • Printer tested: Prusa CORE One+ Gen2

Assembly

  1. Print the base and lid.

  2. Install the Louder ESP32-S3 Rev J2 PCB.

  3. Press the lid into place.

  4. The four rounded retention bumps hold the lid securely without screws.

Compatibility

Designed and physically tested with the Louder ESP32-S3 Rev J2.

Other PCB revisions may require adjustments.

Credits

Based on the official Sonocotta hardware documentation and PCB layout.

https://github.com/sonocotta/esp32-audio-dock

Independent community-designed enclosure, not an official Sonocotta product.