ESP32 Camera Mod for CORE One: 6x4 mm magnets and deeper case (XIAO ESP32-S3 + OV5640)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric magnet pockets (6x4 mm here), a deeper case and PETG settings, for a XIAO ESP32-S3 Sense + OV5640 camera.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A remix of KeepTheBOX's ESP32 Camera Mod for CORE One, which follows the Buddy3D camera's three-magnet corner mount. All credit for the design goes there, and like the original this remix is CC BY-NC-SA 4.0.
It's built for a Seeed XIAO ESP32-S3 Sense with an OV5640 camera (5 MP, autofocus). The firmware is a fork of Prusa's ESP32 camera firmware with autofocus, SD card fixes for the XIAO, digital zoom with virtual pan/tilt, exposure lock, and a timelapse that starts and stops with the print via PrusaLink: https://github.com/SamLovick/Prusa-Firmware-ESP32-Cam
The full write-up, including what went wrong along the way: https://lovickconsulting.com/2026/11/09/prusa-connect-camera-core-one-esp32-s3-ov5640/
Print settings: Prusa CORE One, 0.6 mm nozzle, PETG, 0.20mm STRUCTURAL profile, 240 C nozzle, 85 C bed. Holder: 3 perimeters, 25% infill. The 3MF projects carry the exact settings.