1 / 1
PAX 3 Cleaner – seax-style oven scraper + 100 mm vapour-path spike — zdjęcie 1

PAX 3 Cleaner – seax-style oven scraper + 100 mm vapour-path spike

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tough little Viking seax: the blade scrapes the PAX oven, the 2.8 mm spike cleans the full vapour path.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A cleaning tool for the PAX 3 shaped like a small seax (Viking knife).

  • Blade = oven scraper, chisel edge on one side, sized to fit the 11 mm oven with room to scrape

  • 2.8 x 100 mm spike at the pommel end goes all the way through the vapour path

  • Smooth everywhere so oil wipes off; printed flat so the layers run along the length (strong in bending)

Print settings (tested):

  • PETG, 0.2 mm layers, 0.4 mm nozzle

  • Nozzle 225 C, bed 70 C

  • 6 walls, 100 % infill, brim, flat as oriented, no supports

  • About 20 min, 6 g

Every size is a parameter at the top of the OpenSCAD file.

Designed with OpenSCAD. Remix welcome – please share your version back.

Tagi