PAX 3 Cleaner – seax-style oven scraper + 100 mm vapour-path spike
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tough little Viking seax: the blade scrapes the PAX oven, the 2.8 mm spike cleans the full vapour path.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
A cleaning tool for the PAX 3 shaped like a small seax (Viking knife).
Blade = oven scraper, chisel edge on one side, sized to fit the 11 mm oven with room to scrape
2.8 x 100 mm spike at the pommel end goes all the way through the vapour path
Smooth everywhere so oil wipes off; printed flat so the layers run along the length (strong in bending)
Print settings (tested):
PETG, 0.2 mm layers, 0.4 mm nozzle
Nozzle 225 C, bed 70 C
6 walls, 100 % infill, brim, flat as oriented, no supports
About 20 min, 6 g
Every size is a parameter at the top of the OpenSCAD file.
Designed with OpenSCAD. Remix welcome – please share your version back.
