500 models
Komplement drawer divider A divider to divide 50 cm wide PAX Komplement drawers. The two pieces slot in place and are held together by the drawer. To print For a Prusa CORE One or similarly sized printarea place both pieces at a 45 degree…
Print approx. €6.66–€8.14 excl. taxPreliminary estimate for one variant
Replacement Komplement Shelf Pin/Bracket for PAX cabinets Print Settings Printer Brand: Creality Printer: Ender 6 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .16 Infill: 15% Filament: Hatchbox PLA Notes: Printed on Ender…
A handy device for pressing bricks of ground flower for your PAX 2/3/Plus vaporizer. There's an original version from the vape manufacturer for the same purpose, but that one sucks: it's extremely brittle and breaks after not that many…
Improved version of the shelf bracket pins found elsewhere. This will insert in the IKEA 32mm shelving system without tearing out the holes. they work great and I might just keep them permanently in place recommend 0.15mm layer height, 3…
Drawer Organizer for IKEA PAX Komplement 100x58 Enhance the functionality of your IKEA PAX Komplement 100x58 drawer with this customized organizer. Designed as a remix of the original "Parametric boxes for drawer" Fusion 360 file, it…
USB - Kabelhalterung für IKEA - PAX - Für IKEA PAX-Türen 500mm Breite / Absatz 335 / Halterung (335/2) = 167.5 Halterungen: 01 - USB-Kabel - Halterung - 8x 5mm Breite - L167.5 10 - USB-Kabel - Halterung - 8x 6mm Breite - L167.5…
Nothing more to add. You can modify the size of the cornerpieces easily in the 3mf file, if you have any problems fitting these into your pax komplement. Have fun and keep printing
This is a drawer divider made for the 100cm x 35cm Ikea Pax Komplement mesh drawer (product code 902.572.94). Attaches to the drawer using zipties and can be placed in any position to achieve the desired compartment width.
Schellen 10 bis 50 mm in 2 mm Stufung für Spax-Schraube Kann für viele Reparaturen verwendet werden. Materialwahl je nach Verwendungszweck Spax-Schraube 3 x 15 bzw. 3 x 20 mm Kein Floß, kein Support. Schichthöhe 0,2 mm bis 0,3 mm…
Window stopper for PAX windows. Enables ventilation without the window slamming shut. But please remember to remove the stopper before closing the window. Otherwise the lever will mercilessly destroy the stopper. You can use the opening…
Today I am sharing with you a handle for IKEA PAX sliding wardrobe doors, mounted with one screw in a place already prepared at the factory on the inside of the door.. Status of this project: 2024-06-26 First release, printed and after…
When you are building an IKEA Pax wardrobe, you should fix it to the wall. IKEA provides brackets for that, but if you have a skirting board and cannot push the wardrobe to be flush with the wall, you need a spacer. This is one. If you…
Summary Conceal unused shelf holes in cabinets and bookcases for a cleaner, more refined look – particularly effective in open furniture without doors. Compatibility Tested on IKEA furniture as well as other brands, ensuring compatibility…
Designed for IKEA PAX (wardrobe system) Easy print with no support Screwless Strong support due to angle with big contact surface compared to original part Print on the side with support for both cylinders for a durable part
Impreso con una Ender 3. Filamento utilizado: PLA plus de SUNLU. Relleno del 50%. Distancia entre agujeros de 32mm.
IKEA PAX: Rail holder replacement After several years, the rail holder in our closet broke. Whether it was due to old age or the amount of clothes will forever remain a mystery, though the latter is most likely. After a long search for…
The 3D model "IKEA KOMPLEMENT Shelf Hook for all PAX Wardrobe Frames" is a detailed and accurately scaled replica of the original KOMPLEMENT shelf hook designed specifically for use in all IKEA PAX wardrobe frames. This model provides a…
This is a coat hanger which can be mounted to an IKEA Pax wardrobe. The design is a copy of the original "IKEA Pax KOMPLEMENT Valent Hanger" which can be bought from IKEA. I changed the design of the original one so that it is shorter,…
Useful space-saving boxes to keep your komplement drawer tidy. The models are divided into two groups A and B. Inside an Ikea Komplement drawer you can insert two lines for model A and one line for model B. For each model A and B there…
My Ikea Pax cabinet with glass sliding doors is installed flush against a wall on the right hand side, making it hard to open and even harder to fully close tight. So I designed this snap on pull. It fits tight and secure without needing…
Since the Impaxxo doesn't come with a box for the nuts, I added a inlay for the rugged box. Printed all with PLA+ from Sunlu, works very well.
I printed the cap and mount at 0.3mm line width just to squeeze out a little more quality. The cap fit tightly enough that I didn't bother even adding glue to keep it in place. I also printed the mount as oriented with slim tree supports.…
This mount allows you to store Sortimo Bosch L-Boxxes within an IKEA PAX. You can use the original holes within the PAX to fix the sliders. For a proper mount, you need 4 screws to hold one L-BOXX. I used the following parts: IKEA PAX…
EN This modern doorknob will fit to any furniture. Two versions: I uploaded two models: Model “knob_threaded_inserts.stl” If you have threaded inserts print the file "knob_threaded_inserts.stl". In order to use M4 screws you will first…
This hook should fit any 5 mm cabinet hole. I did print it with PLA, 0,12 mm layer hight, 100% infill and no support. I did hang some weights (6 kg)on it and it seems to have a firm grip and could hold even more. I did add a V2 for easy…
IKEA and PAX are simply used to describe the products these are supposed to be used in conjunction with and have no relationship with this product. The boards, Komplement, for PAX in 50x58 have been sold out and unavailable at my ikea for…
This is a Gridfinity system for an IKEA PAX wardrobe. It fits into the KOMPLEMENT drawer 50x58 cm. ! Some of the print files are up to 225mm in size. They require a correspondingly large print bed. On the other hand, you have to divide…
Ikea pax: Hanging rail support replacement A hanging rail support replacement for ikea pax. Consider printing it on the side for a better rigidity. Happy printing :)
Be afeared, tis Ogphart Bonebiter, a member of the elite Stompaxe Infantry of the Vogland Orcs. Printed on: Piocreate Halot X1 - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully 🗡 Presupported for easy…
Was asked by a friend to for something to hold a Pax Era Pro and a few pods they could keep on their desk. This holds up to 6 pods (3 each side) and Era Pro itself.
Hookboard for the 58 (depth) PAX closets. The board fits into the rear slots of the shelves. It has 6 hooks. It is fastened with self-created dowels that stretch using a wedge. Hookboard für die 58er (Tiefe) PAX Kleiderschränke. Das Board…
I did design this angels for our Wickeltisch / diaper changing table in our Pax Wardrobe. It did print it with no support, 0,2 mm, 50 % Infill. Propably the normal Ikeas hooks will do, but I wanted to be safe. Also when I had my 3D…
Tiny print in place case for bud kups (compatible with pax 3 and pax plus), replacement for the original case the bud kups come with that imo is bigger than it needs to be. Tried printing at .16 and .20mm with good results.
Hook to hang clothes at IKEA KOMPLEMENT valet hanger for PAX.
Ikea Metod cupboards lack a low height drawer. There is one available in the Pax/Komplement series. However, the Pax standard width of 50cm does not fit the Metod's 60cm. Further, on the bottom of my cupboard, the door hinge got in the…
This sturdy, extended shelf allows you to stack two Komplement separators on top of each other. Unfortunately, only one Komplement separator fits in the IKEA PAX wardrobe because the standard shelf is too short. This sturdy, extended…
This is a simple hook for an IKEA PAX clothes rail. This is for an older model of the IKEA PAX clothes rail, where the bar has an oval shaped profile, unlike the current round shaped rails.
Update 04.02.2025 - New 1x2x70 Box with label - New 1x2x70 box with label ##### Here you can find Bins/Boxes for my Gridfinity system for the IKEA PAX wardrobe. If you are not yet familiar with my Gridfinity system, take a look here:…
When assembling the shelves inside a pax wardrobe I found the shelf holders a bit hard to press. So I made a simple tool to hold the holder in place and have more surface to press on to. I have attached the STEP file also for making your…
Hook for IKEA PAX Shelf Holes – Space-Saving Closet Organizer I'm uploading a part of a model designed to fit into the standard holes found in IKEA PAX wardrobes – the ones where you normally insert shelf pins to support your shelves.…
I've just built for my daughter a new IKEA PAX closet, and she asked me for something to organize her necklace collection. I wandered in many ideas across the net, but this one of ZbychuM fit exactly what she wanted. I had to improve a…
Insert designed for cards in 70-micron thick sleeves. Player organizers can be used during the game, when necessary then the cardboard with the player's image can be lifted to lay out a pawn or heraldic shield. If you like my work, please…
this is heavily inspired by the IKEA Komplement holder, of which we have one. Printing a second one was much faster than going to IKEA and buying it. Screws into the existing 5mm/System 32 holes with the standard Euro-Screws ( I used…
Kleine Box 10cm x 10cm ; 5cm hoch für Schrauben Eine Version mit Schrift raus und eine mit Schrift eingezogen. Category: DIY
Made a case for the PAX Era with the keyring slot added.
This is a wall mount holder and charging station for the Pax 3 Vaporizer. It's still able to charge while in the holder. I use Alien Tape for mounting. You can also use velcro or command strips. No supports needed
I needed a holder for my Maverick 88. I created it with the possibility to fit in ikea pax or wall mount. The bottom piece can fit on the bottom of the Pax or on a wall. The top piece have a hole for a padlock or a ziptie Print Settings…
Hook for ikea pax wardrobe door. possible uses: bag handbag clothes hangers hanging decorations hanging clothes
It can be screwed in using IKEA's 100325 screws (or similar).
Designed for Ikea Pax, but works for any other wardrobe with a similar design. This spacer allows to kill the gap between the wardrobe and the wall, this way it can be screwed and secured to the wall.
This is a model to convert a regular IKEA “Komplement” wardrobe rail into two shorter parts with a downward 90° angle. ##### The individual parts can be used as regular replacement parts as well ##### My girlfriend wanted to have a short…
I needed a clothes rail for an IKEA Pax wardrobe. So I created this remix to use an old broomstick as a rod. Suitable for a 15/16" (23.8 mm) broom handle. It works great and you can save 10€ :-) Cheers
This is an organizer that both stores your game and helps set it up on the table. It fits all content included in the box, as well as sleeved cards. Depending on the sleeve it may be a close fit! Uses about 200g of filament. Print as many…
This remix (similarly to the original model) helps to put komplement shelves to levels where otherwise it would not be possible due to the hinges. I could not print the original model successfully with my printer, hence I created this…
This model contains mounts for mounting 2020 aluminium extrusion to the inside of Ikea Pax and other cabinets that use the same system for mounting shelves using 5 mm blind holes at a 32 mm pitch. There are two variants of the part: One…
This is a magnet label to better organize ikea pax/komplement basket contents. You can print the stl and write on it or modify the step file in order to print two colors on the first layer Holes are for 20x6x1.5mm magnets
I would recommend printing them with the technic pin facing up. Also, using a 0.2mm hot end to get a smoother finish. I printed mine on a Bambu A1 mini with a 0.2mm hot end using Overture White PLA. To get the red color, I used a couple…
9mm higher shelf so that 4 drawer and a basketdrawer under the hinge works. Not possible with orginal IKEA solution. Thanks Dan ( @Dan_3D_49659 ) for this solution. I made it only 9mm higher with cutting the model and extrude it.
The model allows to install wall hooks with covered screws. You can choose which kind of hook you want and going for it. The press fit / interference fit makes the connection tight while there is still no need to use tools to connect and…
Este diseño te permite reutilizar los portabobinas originales de Snapmaker anclándolos directamente a los laterales de un armario IKEA PAX . Al sacar las bobinas de la estructura de la impresora, consigues un espacio de trabajo más limpio…
Hanger/hook for Ikea Pax wardrobe door. possible uses: Clothes hanger Hanging objects with string Hanging decoratio
There was no Lamp / GoPro Holder for my Alpina Carapax Helmet , so i designend this one. Just Clip it on and lets go. Turn it on the Front or back flat Area
I create this jig to speed up the assembly of PAX wardrobe. It helps you keep the screws perpendicular to the panels. Just insert the screw from the bottom, align it with the hole and screw it down. According to accuracy of your printer…
WIHA screwdriver PocketMax holder for IKEA BESTA PAX Holder for IKEA BESTA and PAX to store a WIHA screwdriver PocketMax. IKEA PAX partlist: 2x screw (100325) IKEA BESTA partlist: 2x screw (113287) Model printed with: Prusament PETG prusa…
For better print results without support, I wanted to separate the dowel from the rest of the print when affixing stuff to my cabinets. This is basically just the dowel part of the Ikea shelf pin, which is inserted into the pre-drilled…
Designed to mount the EPSON ES-580W power supply (EU-model) within an IKEA Pax cabinet .
Ikea Pax Complement Wardrobe Organizer. Complement wardrobe hooks for the 355mm deep Ikea Pax wardrobe. I added 7 hooks. It assembles without tools. CLICK AND DONE. It consists of 3 parts. 1 part with the 7 hooks. Parts 2 and 3 are used…
Ikea PAX hook made for stabilise ironing board, but possible is hang it or other tools.
Schnell und einfach Kleiderbügel vor dem Einräumen am PAX parken! Attach your clothes hanger easy and simple on a PAX cabinet! Habe meine in weißem PLA gedruckt damit die Halter zu den Türen passen (siehe Bilder), kann aber in jeder…
A holder for the pipes of a Kärcher SV7 Steam Cleaner to be stored in an Ikea Pax closet.
I built a walk-in closet using the IKEA PAX system. To cover the back side of the closet, I mounted wooden boards. These holders can be used to screw the back panels onto the cabinet. Assembly of the side holder. Assembly of the…
Since Ikea seems to have changed the measurement of the inside of the full width Pax from 98,2cm to 96,2cm newer “Komplement” drawers won't fit in old Pax models without a 12mm spacer on each side. They will also work for the half wide…
Print it horizontally, as shown in the image. If you print it vertically, the layers will break. I printed with 0.2mm layers and 3 walls. I recommend using PETG, but if you only have PLA, that will work fine, although it will probably…
I needed it to fit in to a larger hole and not the original pin for the shelf. Its 160% Larger and pin deletion.
Adapter Set für Heizkörper Handtuchhalterung Das ist ein Recycling Projekt aus einem defekten IKEA PAX Hosenhalter. Hierfür wird der 3D gedruckte Hook um ein Erweiterungs Set zsm mit den Rest Teilen eines IKEA PAX Hosenhalter zu einem…
this is a scale roto pax that go on your scx24
A box to store my pax with all the accessories. The pax stand can be find here: https://www.thingiverse.com/thing:2803609 The pax funnel can be found here: https://www.thingiverse.com/thing:963088 Print Settings Printer Brand: Prusa…
The attachments of your IKEA PAX KOMPLEMENT bar broke? No problem, this is your replacement. The original screws fit. You have to place the attachment on both sides of the bar before you mount them (with the original attachment, you slide…
A reference Model/Template for the PAX Wardrobe Frame and KOMPLEMENT Pull-Out Tray , So you can create your Models to be compatible with that Ikea Furniture. I made the small 50cm with versions. They are not completely accurate but it…
The older model of Paxton reader (for net2) will mount nicely to a standard single blanking plate and I've used this method before. Had single back boxes fitted at my latest project only to find the new slimline P10 readers are larger and…
A simple spoolholder (up to 8 spools) for an IKEA PAX wardrobe. Printed with PETG and 20% infill. Layer height 0.15mm. Additionally you need a 12mm pipe and 4 x M6 16mm screws/bolts. For a 60cm deep PAX wardrobe, the pipe should be around…
Hallo zusammen Diese Modelle sind für die Lehre der Graphomotorik gedacht, sie eignen sich jedoch auch für Girlanden oder ähnliche Dekoartikel. / These models are intended for teaching graphomotor skills, but they are also suitable for…
Theses part help to drill hole for shelf pin in case you want to make your own shelf instead of buying the expensive one from ikea. You need to drill a 1cm deep hole with a 5mm drill bit. Tested with 35cm depth but should also work with…
I recommend printing this with at least 3 perimeters. I've design the slot for a nut that is 2.4mm but you can easily update the design here:…
Fragrance sample holder for original plastic Ikea Pax Komplement dividers. I'm not sure if it fits the new felt dividers, but it should be easy to remix. It clips under walls so it doesn't move. Fits 14 samples.
As a paramedic you need to have your material organized ;-) I made this interior for the PAX Holster. All the equipment you'll find below. Note: I don't get sponsored by any of these brands that I made the holder for. Buy all you need:…
I needed some additional storage within my pax. Will fit in the back of an 60cm depth pax closet.
Accommodates sleeved cards (I used Mayday premium for this but checked Dragon Shield and they fit fine, so I think any brand of sleeves should be good). No lid lift. PLEASE NOTE: I only intend to play this game 2-player so I designed the…
Broken holders needed to be replaced by some sturdier. It ended with this design that has been loaded with clothes for years now and remains reliable
Custom 3D-Printed Low-Profile Sliding Door Handle / Pull (Medium Grey) Slim Clearance Design: Specially designed with a low-profile angle to clear narrow gaps. Perfect for overlapping sliding wardrobe doors, like the IKEA PAX system,…
🎒 IKEA PAX Backpack Holder – No Screws A simple and practical backpack holder designed specifically for IKEA PAX wardrobes. This holder allows you to store backpacks neatly inside your PAX wardrobe without drilling holes or using screws.…
Here are some mounts that I made to lock wooden boards on the Ikea Komplement for Pax, used on a Bror. I used PETG to make it stronger but any plastic could probably do it. It can be printed without supports. I made it for 10 mm wooden…
IKEA KAKTUS Hanger for PAX Doors – Stylish and Practical Mount Add a touch of greenery to your IKEA PAX wardrobe with this custom-designed hanger for the IKEA KAKTUS planter. This clever accessory allows you to securely hang your planter…
Thank you, Iwan for this splendid tool! I added a larger knuled knob, a center hole to fasten the screw with a screwdriver and a hole to remove the little f***er again.. Prints upright without support and standard PLA balanced profile. In…
