PAX Puck Press
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.31 – €0.38 net (excluding VAT)
For file: PAX Puck Press Base_0.2mm_PETG_MINI_25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.35 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 25.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Handy device for compacting flower for your PAX 2/3/Plus Vaporizer
- Rating
- 4.857 / 5
- Likes
- 67
- Downloads
- 634
- Makes
- 5
- Views
- 2,580
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A handy device for pressing bricks of ground flower for your PAX 2/3/Plus vaporizer.
There's an original version from the vape manufacturer for the same purpose, but that one sucks:
- it's extremely brittle and breaks after not that many uses
- at $25 it's absurdly overpriced for a bunch of tiny pieces of cheap plastic with a few magnets
Actually purchased the original part at first, only to have it break on me super fast. So I reconstructed the thing to be able to make a cheap replacement. It doesn't have magnets which make the original part very comfortable to use, but whatever. It does the job, and if you put a small rubber band around it, the parts will stay together too.
Print instructions
- PETG
- 0.4mm nozzle
- 0.2mm layer height
- 5 perimeters
- 25% Infill, Honeycomb
- Ironing on, all top surfaces
- No supports needed
You best print every part separately to avoid excessive stringing.
The Pax logo on the tube part in the photos was simply painted with a waterproof marker.