1 / 3
Ikea Pax heavy duty angle / "Schwerlast" Winkel für Ikea Pax — image 1
1 / 3

Ikea Pax heavy duty angle / "Schwerlast" Winkel für Ikea Pax

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ikea Pax heavy duty angle / "Schwerlast" Winkel für Ikea Pax for Wickeltisch / diaper changing table or else.

Rating
0 / 5
Likes
19
Downloads
93
Makes
1
Views
1,035
Reviews
0

Updated at source:

Model information

Category
Bedroom
License
Creative Commons — Attribution

I did design this angels for our Wickeltisch / diaper changing table in our Pax Wardrobe. It did print it with no support, 0,2 mm, 50 % Infill. Propably the normal Ikeas hooks will do, but I wanted to be safe. 

Also when I had my 3D Printes in that original Pax befor it did sag a bit. So the system maybe also useable for a 3d Printing shelf.

The first angle file is with more holes and if you are using a new non Ikea shelf. 

The second angle file the hole should fit the original pax shelf.

To attache does to the Pax Wardrobe you will need some 6,3 x 16 mm Scews like does

https://www.amazon.de/dp/B08YS2X2FC?psc=1&ref=ppx_yo2ov_dt_b_product_details

For our diaper changing table I did exchange the standard Pax Komplement shelf with a new shelf with 961 mm x 750 mm size. I recommand to screw the angels on the sites first and after that put the shelf on it and mark the holes. Drill the 5 mm holes with a drill with a dept stop (14-15 mm depth) multiple dept stop print to be found on printables.

The matching organizer system can be found here:

 

https://www.printables.com/model/829580-ikea-pax-organizer-system-for-changing-table-and-e

 

Tags