Ikea Pax heavy duty angle / "Schwerlast" Winkel für Ikea Pax
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ikea Pax heavy duty angle / "Schwerlast" Winkel für Ikea Pax for Wickeltisch / diaper changing table or else.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 1035
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
I did design this angels for our Wickeltisch / diaper changing table in our Pax Wardrobe. It did print it with no support, 0,2 mm, 50 % Infill. Propably the normal Ikeas hooks will do, but I wanted to be safe.
Also when I had my 3D Printes in that original Pax befor it did sag a bit. So the system maybe also useable for a 3d Printing shelf.
The first angle file is with more holes and if you are using a new non Ikea shelf.
The second angle file the hole should fit the original pax shelf.
To attache does to the Pax Wardrobe you will need some 6,3 x 16 mm Scews like does
https://www.amazon.de/dp/B08YS2X2FC?psc=1&ref=ppx_yo2ov_dt_b_product_details
For our diaper changing table I did exchange the standard Pax Komplement shelf with a new shelf with 961 mm x 750 mm size. I recommand to screw the angels on the sites first and after that put the shelf on it and mark the holes. Drill the 5 mm holes with a drill with a dept stop (14-15 mm depth) multiple dept stop print to be found on printables.
The matching organizer system can be found here:
https://www.printables.com/model/829580-ikea-pax-organizer-system-for-changing-table-and-e